3M

3M™ Automotive Acrylic Plus Attachment Tape 06384 is a 1.12 mm (.045-inch) thick, medium-density black foam tape with high performance acrylic adhesives on both sides and a red release liner. Acrylic Plus Attachment Tapes are stronger, higher performing, high stress handling products than other automotive attachment tpaes. Typical applications areas for 06384 include body side moldings, claddings, rock panel trim, wheel flares, bumper trim and other exterior and interior automotive trim components. OEM approved, high performance acrylic adhesive High conformability Black, high-strength core resulting in improved bond-line quality Cold temperature impact resistance Easy liner release Adhesion promoter recommended for tape-to-part adhesion on plastic parts Black color provides good bond-line appearance

3M™ Perfect-It™ Foam Polishing Pad is a fine pore soft foam pad . This foam pad quickly removes compound swirls and minor defects in both aftermarket and OEM paint. 3M™ Perfect-It™ Foam Polishing Pad is a fine pore soft foam pad . This foam pad quickly removes compound swirls and minor defects in both aftermarket and OEM paint. • Designed to remove compound swirl marks and other minor surface defects • Get a high gloss finish using a fine, soft foam polishing pad • For use with all 3M™ Polishes

READY TO USE

Thin .76 mm tape gives streamlined flush appearance for lightweight auto moldings and trim Gray, closed-cell acrylic foam delivers strength and conformability Adheres well to traditional paint systems Width of ½” is a good choice for a broad range of lightweight trim parts Adhesion promoter recommended for tape-to-part adhesion on plastic parts 3M™ Automotive Attachment Tape 06377 is just .03” (.76 mm) thick, making it excellent for flush, streamlined and permanent application of lightweight auto trim and moldings. This ½”-wide OEM-approved tape incorporates a strong yet conformable closed-cell acrylic foam with high performance acrylic adhesive on both sides. This adhesive resists plasticizers and delivers high peel and shear adhesion. A Thin Attachment Tape for a Range of Lightweight Trim and Moldings Our 3M™ Automotive Attachment Tape 06377 is a good choice for permanent attachment of lighter moldings, trims, nameplates and emblems to automotive surfaces. This OEM approved .03" (.76 mm) thick attachment tape is built on a core of medium density closed cell acrylic foam. This foam provides a blend of strength and conformability for a flush, professional appearance even across long applications such as door edge moldings. The tape is 1/2" wide for a versatile range of lightweight parts and applications. The viscoelastic foam core conforms well even to complex geometries. It is engineered for stress relaxation when exposed to high stress loads, and maintains bond-line aesthetics under normal stress loads. A red liner (PDF, 147 Kb) provides easy one-piece release for efficient application. The gray-colored tape blends well with automotive surfaces for a smooth appearance. 3M recommends the use of 3M™ Automotive Adhesion Promoter 06396 for tape-to-part adhesion with 3M tape 06377 on all plastic parts such as RIM, TPO, PPO, PP and PC. 3M™ Automotive Attachment Tape 06377 is a good choice for permanent attachment of lighter moldings, trims, nameplates and emblems to automotive surfaces. Flush fit of emblems, nameplates badges and other lightweight moldings and trim Recommended Applications Badges, nameplates and emblems Lightweight moldings and door edge trim Window lace Luggage rack slats

Quick wax refreshes the appearance of automobiles • Contains carnauba wax produces a deep, glossy shine • Apply wet or dry • Mist-on/wipe-off application for convenience • Treat an entire vehicle in just a few minutes 3M™ Quick Wax recaptures that "just waxed" look, either for touch ups between washes or streak-free drying after a wash. Our wax contains premium-quality carnauba wax, which is preferred by car enthusiasts for its rich, deep shine. Spray bottle makes applying the wax Also try 3M™ Performance Finish Liquid Wax 3M™ Quick Wax renews the shine and gloss of your vehicle between major wax jobs. Our spray-on detailing wax is made with genuine carnauba wax for professional-quality results. This product is typically used for ongoing maintenance to keep vehicles looking freshly waxed. The specially designed trigger offers an easy-to-apply, mist-on-wipe off treatment that can be used on a wet or dry vehicle. The quick wax can be used daily, weekly or monthly (PDF, 1.45 Mb) to keep that clean look in the event your car runs through a quick rain storm or sprinkler, or is hit by bird droppings, or exposed to other outside contaminants that can mess up the shiny, newly waxed look that you want your car to have every day. Simply spray the product on the affected area and wipe dry with a 3M Microfiber Detail Cloth (sold separately) to rejuvenate that mirror finish. The clear coat safe, no build-up formula easily removes grime, dirt and other harmful contaminants without scratching glossy finishes.Our quick wax is recommended for use on painted surfaces, glass, plastic, wheels and tires. Our quality spray-on wax formula contains top-quality ingredients such as carnauba wax, which is a naturally occurring wax harvested from tropical trees. No other wax achieves the warmth and depth of carnauba wax, which has made it a favorite among automotive professionals. Carnauba wax also protects surfaces against moisture and heat to preserve the original shine of an au tomobile.

Squeegee wipes away swarf and water from work surface Accessory is also used for smoothing filler and putty Rubber is firm with just enough flexibility to be gentle on surfaces Sized for a comfortable and secure hold Measures 2" x 3" 3M™ Wetordry™ Rubber Squeegee is made from flexible, sturdy rubber, ideal for removing sludge created when sanding or for applying glazing putty and plastic filler to repair surfaces. Our squeegee wipes away excess material so that you can get a better view of the work surface. It also helps smooth body filler and glazing putty that is being applied. 3M™ Wetordry™ Rubber Squeegee Measures 2" x 3"Dual Purpose Squeegee and Filler Smoother As sanding swarf, sludge and water accumulate, our 3M™ Wetordry™ Rubber Squeegee hugs the surface to wipe away the material that obscures your view of how the work is progressing. The squeegee is sturdy enough to plow through sludge, yet soft and flexible enough to be gentle on the surface. The same attributes make it a perfect choice for applying body filler and glazing putty. The squeegee smooths filler and putty to be even with the surrounding surface for professional quality automotive restoration. Designed for Convenience and Control At 2" x 3", our rubber squeegee is sized to fit comfortably in most hands. You may also use it as a block for smaller pieces of sandpaper. With the squeegee, you'll have better control of the work being done, whether that is removing swarf and water or applying filler and glazing putty. Rci

Spray-on coating applies conveniently with conventional spray equipment Designed to protect paint booth walls, windows, lights and fixtures for optimal lighting and paint booth cleanliness Excellent solvent resistance for protection against paint and primer overspray Washes off with water Non-tacky formula resists dirt and discoloration Dries quickly to a clear film that won’t smear or smudge 3M™ Booth Coating is a water-based solution for protecting paint booth walls from paint overspray. Simply apply 1 to 2 medium wet coats with any 2.0 spray nozzle, such as the Accuspray™ 2.0 disposable spray nozzle. 3M™ Booth Coating dries to a clear film across fittings, walls and windows. The non-tacky formula won’t discolor from dust or dirt, and removes cleanly with water. 3M™ Booth Coating is an easy to use, clear spray-on protective coating that helps you protect your paint booths. Specifically designed to protect paint booth walls, lights A Spray-On Coating for Fast, Convenient Paint Booth Protection 3M™ Booth Coating is an easy to use, clear spray-on protective coating that helps you protect your paint booths. This non-tacky, liquid-based coating sprays on with conventional spray equipment such as the Accuspray™ 2.0 disposable spray nozzle to cover every vital part of your paint booth including windows, walls, lights and fixtures. It dries to a clear, clean film that won't smudge or smear, and resists solvents to protect your paint booth from paint and primer overspray. When it's time to clean the booth, you can simply wash off 3M™ Booth Coating quickly and cleanly with water. The Science of Staying Clean from 3M Our 3M™ Booth Coating showcases how solid science can help collision repair professionals maintain clean, well-lit paint booths — and maintain excellence in your overall operations. Engineered by 3M specifically to protect paint booth surfaces from paint and primer overspray, it's another great example of what 3M does best: Science. Applied to Life.™

Wax produces a high-gloss, deep-luster and durable finish Versatile formula is safe for clear coats and all cured paint finishes Wax may be applied by hand or with a polisher Easy to apply and remove 3M™ Premium Liquid Wax protects paint finishes while producing a high-gloss, deep-luster appearance. Our wax is clear coat safe and may be used on all cured paint finishes. For use by hand or with an orbital polisher.

For very light sanding on all automotive paints on areas that require hand compounding and for sanding dark colored paints. 3Ms fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Suggested hand sanding pad 05530. Designed for light sanding prior to compounding Sheet size eliminates the need of tearing—entire sheet can be usedDurable backing resists tearing and wrinkling Sheet size eliminates the need of tearing—entire sheet can be used Durable backing resists tearing and wrinkling Durable backing resists tearing and wrinkling Range of fine grades from 1000 up to 3000 for the most professional results Available in 9” x 11” and 5-1/2” x 9” sheets for a variety of uses

Restore Clarity to Plastic Lenses in 15 Minutes or Less Incorporating two premium 3M brands, our 3M™ Perfect-It™ Headlight Lens Restoration Kit contains a complete system of tools, light abrasives, compound and polish to restore clarity and remove dullness and haze from headlight and other plastic vehicle lenses. Instead of replacing the lenses, collision repair professionals can refine and eliminate tiny scratches and surface imperfections which cause haze, yellowing and cloudiness, in 15 minutes or less. The kit uses a simple process involving lightly sanding and polishing the lenses with a series of 3M™ Trizact™ abrasive discs from P800 - P3000, along with 3M™ Perfect-It™ EX Rubbing Compound and 3M™ Perfect-It™ EX Machine Polish. All of the discs feature our Hookit™ hook-and-loop attachment, which works with the included Hookit™ soft interface pad for fast, efficient change-outs without additional tools. The included handheld sanding and polishing tools accommodate all 3" discs and pads for precise sanding and polishing in smaller areas. 3M™ Perfect-It™ Headlight Lens Restoration Kit includes: 3M™ Trizact™ Foam Discs, 3", P3000 3M™ Trizact™ Foam Discs, 3", P1000 3M™ Perfect It™ Foam Compounding Pad, 4" 3M™ Perfect It™ Foam Polishing Pad, 4" 3M™ Hookit Soft Interface Pad, 3" 3M™ Random Orbital Sander, Pistol Grip, 3" 1/8" orbit 3M™ Buffer, Pistol Grip, 3" 3M™ Purple Clean Sanding Hookit™ Disc 3", P800 3M™ Purple Clean Sanding Hookit™ Disc 3", P500 3M™ Perfect It™ EX Rubbing Compound 8oz 3M™ Perfect It™ EX Machine Polish 8oz The 3M™ Perfect-It™ Brand: 3M's Highest-Quality Solution for Finishing Coated Surfaces Our Perfect-It brand represents a complete range of solutions designed for busy shops to achieve perfect defect-free finishes, every time, in as little time as possible. Perfect-It brand products have been developed according to a step-by-step system — there's no need to create your own processes to get the best finish. Premium product performance means shorter process times at every step. You use less material, and you have less material to clean up. In all, our Perfect-It brand products let you complete more jobs in the same amount of time. You get better throughput, the finest and most consistent finishes, and increased customer satisfaction with every job.

3M™ Solvent Spray Nozzle Trigger Head helps you apply solvent or water-based detailing chemicals with greater control and convenience. Spray-On Convenience When it's time to apply detailing chemicals, spraying them on with our 3M™ Solvent Spray Nozzle Trigger Head is a fast and convenient way to go. Use our spray nozzle with virtually any solvent or water-based detailing product of your choice. Simply screw the nozzle onto the container and you're ready to apply. More Control, Less Cleanup The spray comes out in a controlled, targeted manner. You can direct the application wherever you want it without a significant amount of overspray, resulting in less mess and cleanup work. An adjustable dial lets you change the spray from streaming to fine mist. Our nozzle sprayer even lets you spray in an upside down position. Ease of Application A trigger applicator makes applying detailing products easy. Simply pull back the trigger for each application of spray. Durable, Long Lasting Applicator Our spray nozzle is made from a durable plastic that is resistant to most chemical solutions.

Conformable pad quiets noise around trunks, door panels, hoods, floor pans and more Self-adhesive material is easy to install without any special tools Multi-purpose sound deadening mat reduces road noise, sound system vibrations, and rattles Cut to size as required Center perforation allows easy door panel installation Replicate sound deadening qualities of the OEM using 3M™ Sound Deadening Pad. Our pad suppresses road noise, sound system vibrations, rattles and other distracting sounds. The self-adhesive pad is easily cut to size and applied. Suppress noise and vibration such as road noise, engine sounds or rattle and squeaks, by installing 3M™ Sound Deadening Pad. Our pad improves the sound quality of your journey and only needs simple tools such as scissors for installation. Our self-adhesive sheets are embossed with a diamond pattern to match OEM standards, and are compatible for painting if desired. Being conformable and easy to install, they are ideal to be custom cut and applied to floor pans, engine compartments, hoods, deck lids, inside panels and on body panels.

Controlled compressability allows for easy installation Ribbon sealer will not squeeze out, providing performance longevity Designed to not allow light to contact pinchweld One-roll sealer offers sufficient material to replace one windshield or backlight 3M™ Windo-Weld™ Round Ribbon Sealer is designed as one roll of sealer with setting blocks. We constructed this ribbon sealer with a unique feature of controlled compressability which allows for easy installation. This product will not squeeze out or allow light to contact pinchweld. This roll of sealer comes with a sufficient amount of material to replace one windshield or backlite. We designed 3M™ Windo-Weld™ Round Ribbon Sealer as one roll of sealer with setting blocks. This ribbon sealer comes with the feature of controlled compressibility. This feature allows for easy installation and will not squeeze out or allow light to contact pinchweld. One-roll sealer offers sufficient material to replace one windshield or backlightCompress with Control for Easy Install We designed 3M™ Windo-Weld™ Round Ribbon Sealer as one roll of sealer with setting blocks. This ribbon sealer comes with the feature of controlled compressibility. This feature allows for easy installation and will not squeeze out or allow light to contact pinchweld. As a 15-foot roll, this product has a sufficient amount of material to replace one windshield or backlight. For controlled compressability and easy installation, utilize the features of 3M™ Windo-Weld™ Round Ribbon Sealer, a one-roll sealer that offers sufficient material for a backlite or windshield replacement. Controlled compressability allows for easy installationFor reference: 3M™ Windo-Weld™ Round Ribbon Sealer is a bulk-packed version of 3M™ Windo-Weld™ Round Ribbon Sealer. Exceptional One-Roll Ribbon Sealer For controlled compressability and easy installation, utilize the features of 3M™ Windo-Weld™ Round Ribbon Sealer, a one-roll sealer that offers sufficient material for a backlite or windshield replacement. Easy to use, enjoy the advantages of our ribbon sealer, a product that offers optimal results and performance longevity.

Wash and wax product requires no water Formula wipes away easily for a streak-free finish Sprays with a uniform generous coverage Easy to clean up and avoid residue from any missed spots Foaming formula clings for great cleaning on vertical surfaces High gloss, smooth finish beads water better than 3M™ Car Wash Soap alone 3M™ Car Wash & Wax cleans light dirt and dust on all exterior automotive surfaces, including glass, paint, chrome, plastic and metal. This product is excellent for use in environments or regions where water conservation is critical, as this product is intended for use without any water required. Makes Easy Work of Light Exterior Automotive Cleaning When your vehicle needs a little touch up cleaning to make it look its best, 3M™ Car Wash & Wax is an ideal choice to get glass, paint, chrome, plastic and metal looking bright, shiny and clean. Simply spray on the thick, white foam and then wipe it off to reveal a streak-free finish. Our foam is formulated to cling, even on vertical surfaces. Its exceptional clinging action means it won't cause a mess by running or dripping. Requires No Water With our 3M™ Car Wash & Wax, you can leave the hose or sprayer tucked away. That's because our foam wash and wax cleans without the use of water, which also reduces mess. Plus, if you live in a region with water conservation policies, you can clean your car without consuming any water resources. It should be noted that this product is for light cleaning applications, not heavy-duty cleaning of mud, tar and grime. Leaves Cars Looking Great While cleaning light dust and dirt, our 3M™ Car Wash & Wax enriches exterior surfaces with benefits of a wax to promote water beading, gloss and a streak-free finish. Our wash and wax leaves a high gloss, smooth finish that beads water better than car wash soap alone. 3M Strives to Make Auto Care Easier 3M researches the needs of people who own and care for the upkeep and maintenance of automobiles. Then, 3M applies principles of science to help solve the common challenges when working to make vehicles perform and look better. 3M™ Car Wash & Wax is just one example of 3M ingenuity at work.

3M’s best-performing rubbing compound for removing P1200 or finer sand scratches Formulated for a broad range of user conditions without sticking or leaving residual film Works especially well on many newer, harder to buff clear coats Smooth-handling compound reduces powdering and leaves a refined finish on all auto paint surfaces Holds better on compounding pads for reduced sling, mess and cleanup time Part of the 3M™ Perfect-It™ Paint Finishing System for showroom grade finishes

Foam Hookit™ Sanding Block to be used as an accessory item with our Hookit™ abrasive products for sanding filler, primer and other substrates. 3M™ Hand Sanding Blocks help make sanding easier in difficult locations. These products were designed and manufactured to provide users with comfortable and easy to use tools for their everyday applications. You can use these products with the 3M Purple Clean Sand Sheet Roll to efficiently complete your repair. The bright yellow design helps make them easy to find in dusty shop conditions. Dust free block used for sanding applications. The durable plastic sticks have 3M™ Hookit™ Attachment laminated on both sides for easy abrasive attachment. The bright yellow colour helps the sticks stand out and easier to find in today’s shop conditions The stick 3M™ Hookit™ Systems allows technicians to reach difficult areas.

Quick and easy spray on/wipe off product that cleans and adds shine and depth to painted surfaces that is clear coat safe.

3M™ Gloss Enhancer is a quick and easy, "spray on / wipe off" product that can restore a just waxed look and feel. 3M™ Gloss Enhancer is also recommended for use as a spray detailing product to assist in the removal of buffing residue, and as a lubricant for claying a vehicle. Directions for Use: Do not apply in direct sunlight or onto a hot surface. 1. Shake well before using. 2. Remove any grit that could scratch the paint surface. 3. Spray on and wipe off small areas - one panel at a time. 4. Remove any dried overspray with a damp cloth. Tips:- For a clay lubricant, use enough 3M™ Gloss Enhancer to completely wet the surface. After claying, wipe off the residue before it dries.

•      Quick and easy “spray-on/wipe-off” product

•      Cleans and adds shine and depth to painted surfaces

•      Clear coat safe

•      VOC content less than 15%

3M™ Premium Liquid Wax, Clear coat safe wax. Use on all cured paint finishes. For use by hand or with an orbital polisher. Produces a high-gloss, deep-luster, durable finish on both new and used car paints. Special formulation is capable of removing road film or light oxidation from car finishes. Heavily oxidized finishes may require compounding with 3M™ Super Duty Rubbing Compound, part number 39004 prior to applying wax. Clear coat safe wax Use on all cured paint finishes For use by hand or with an orbital polisher Produces a high-gloss, deep-luster, durable finish on both new and used car paints Special formulation is capable of removing road film or light oxidation from car finishes Heavily oxidized finishes may require compounding prior to applying wax VOC content less than 15%

Features 3M™ Precision-Shaped Grain, triangular-shaped grains that cut at least 30% faster and last at least 30% longer than other conventional ceramic abrasives Clean Sanding multi-hole pattern delivers excellent dust extraction 3M™ Hookit™ hook-and-loop style abrasive attaches firmly, removes quickly for fast change-out Kiss-cut scoring technology allows for use in multiple sheet lengths Sharper cutting surface means less pressure is required Grains are electrostatically oriented on abrasive surface for efficient cut Our Cubitron™ II Hookit™ Clean Sanding Sheet Rolls 737U combines the highest 3M technology for automotive repair. Its long-lasting triangular shaped grain and multi-hole pattern for superior dust extraction make it ideal for paint removal, rough body filler shaping, fine feather-edging or final prep before blending or priming. Our Hookit™ system makes for quick change-outs of abrasive sheets. Cubitron™ abrasives feature Precision-Shaped Grain (PSG) technology, which allows engineers to control the geometry of the abrasive grain for a truly fast, efficient cut. Kiss-cut scoring technology allows for use in multiple sheet lengthsOur 3M™ Cubitron™ II Hookit™ File Sheet 737U was developed for superior cut and long life during key stages in auto body repair. Its long lasting triangular shaped grain and multi hole pattern for superior dust extraction make the sheet ideal for paint removal, rough body filler shaping, fine feather edging or final prep before blending or priming. Our Hookit™ system makes for quick change outs of abrasive sheets. This abrasive is ideal for feather edging, as a final sanding step before priming, or during prep before blending. About 3M™ Cubitron™ II and Precision-Shaped Grain 3M™ Cubitron™ II abrasive discs, file sheets and sheet rolls have raised the bar for high-performing abrasives. Cubitron™ II abrasives feature Precision-Shaped Grain (PSG) technology, which helps provide faster cut. The result: Cubitron™ II cuts 30% faster and lasts 30% longer than conventional ceramic abrasives..

Restores that deep black new look to tires and restores a deep rich natural appearance to exterior rubber bumpers or vinyl moldings. Cleans and rejuvenates. Restores a deep black new look to tires and restores a deep rich natural appearance to exterior rubber bumpers or vinyl moldings. Restores a deep, black, natural appearance to tires Restores a deep rich natural appearance to exterior rubber bumpers or vinyl moldings Fine mist sprayer Safe on all exterior moldings, bumpers, tires, etc. Natural shine is long lasting and avoids slinging Cleans and rejuvenates

• Foam Tape eliminates hard paint lines in the jamb areas • Specialty tape helps reduce rework due to unwanted tape lines • One-step application is simpler than masking jambs with conventional masking tape and masking paper • Offset adhesive and hollow tube design conforms and seals variety of openings • Adhesive allows foam tape to be repositioned, until pressed with moderate pressure along the length of the foam. 3M™ Soft Edge Foam Masking Tape PLUS makes jamb masking quick, easy and effective. Use our 21 mm width foam tape for jamb masking and other areas that need to be sealed during painting. This tape is the easy way to produce professional-looking paint transition lines.

High quality, single component formula adheres well to bare metal, primed metal and painted surfaces Moisture curing property provides excellent performance in high heat and humidity environments Non-Shrinking, non-cracking, low/no odor formula remains flexible and offers superior results to solvent-based sealers Paintable after 30-45 minutes Thick consistency is able to fill large voids Can be smoothed to a featheredge or brushed Recommended for use with 3M™ Single Component Cartridge Applicator Gun PN08990 or 3M™ Professional Caulking Gun PN08993 Our 3M™ Urethane Seam Sealer is a high solids seam sealer ideal for sealing automotive and RV seams and joints. It adheres well to bare metal, primed metal and painted surfaces, and if desired can be smoothed to a featheredge and/or brushed. Tack free and paintable after 30-45 minutes, this urethane formula is permanently flexible and offers superior performance to solvent-based sealers. 3M™ Urethane Seam Sealer is an excellent choice when sealing interior or exterior seams to help prevent the intrusion of water, dust, and air, aiding in providing corrosion resistance at these locations. High performance general purpose seam sealerCreate Tight, Long-Lasting Seals 3M™ Urethane Seam Sealer is an excellent choice when sealing interior or exterior seams to help prevent the intrusion of water, dust, and air, aiding in providing corrosion resistance at these locations. Choose this seam sealer for high-quality sealing of seams and joints on primed metal or painted surfaces, and even on bare metal. It applies easily and is formulated for long-lasting support to the seam without shrinking, cracking, or causing unpleasant odors. Fill in Gaps with Confidence With its thick consistency, our 3M™ Urethane Seam Sealer is an excellent gap sealer and you can feel confident using this sealer to fill large voids between parts where they occur. Designed to be used over epoxy or urethane based primers, the sealer comes in several colors to enable color matching. Note that the sealer should be top coated when exposed to ultra violet rays. Excellent Performance in High Heat and Humidity While some seam sealers require cure time in a completely dry environment, our 3M™ Urethane Seam Sealer is moisture-curing so it provides a reliable seal regardless of moisture or humidity in the air. It can be painted after 30-45 minutes. Rigid or Flex Pack Options This sealer comes in either a flexible foil pack or rigid metal cartridge. Application of the cartridge sealer requires the use of a 3M™ Single Component Cartridge Applicator Gun - pneumatic (08990) or 3M™ Professional Caulking Gun (08993), and 3M™ Threaded Cartridge Nozzles (08187). Foil packs are designed for use with 3M™ Flexible Package Applicator Gun - Pneumatic (08399) or 3M™ Flex Pack Applicator (08398) these include one applicator nozzle, additional nozzles may be acquired as PN (08188).

Formulated to remove compound swirl marks Leaves a swirl-free finish when applied with a 3M™ Foam Polishing Pad Formulated for vehicles with dark color paints Easy clean up, contains no waxes or silicones View all details Details Machine polish designed to remove compound swirl marks and other minor surface defects. Good handling, easy cleanup. Proven performer. Removes Tough Swirl Marks 3M™ Machine Polish eliminates challenging swirl marks that can occur on automotive finishes. 3M™ Machine Polish also refines other scratches that occur from car washes and daily use. Our 3M™ Machine Polish cuts out these abrasions and other minor surface defects when applied with a 3M™ Foam Polishing Pad. Our polish quickly removes compound swirls caused by wool pads. Versatile Polish Works with Today's Automotive Paints Our 3M™ Machine Polish formula contains no waxes or silicones. It is compatible with all types of paints and is clear coat safe. Our formula requires less clean up than many competitive products. Formulated to remove compound swirl marks Leaves a swirl-free finish when applied with a 3M™ Foam Polishing Pad Formulated for vehicles with dark color paints Easy clean up, contains no waxes or silicones

• Bonds fully cured automotive paints and plastic for interior and exterior applications • Strong adhesion resists environmental exposure such as water and heat • Quick-acting adhesive sets in about 15 minutes and fully cures in 24 hours • Adhesive dries clear for bonding transparent or translucent plastics • Strong-adhesive properties create a permanent bond 3M™ Plastic and Emblem Adhesive permanently bonds plastic and metal emblems, rigid plastic parts, taillight lenses, trim strips, and other parts for both interior and exterior applications. Strong, quick-drying adhesive can be used for bonding plastic or metal emblems, interior rigid plastic, tail light lenses, vinyl side moldings or upholstery Strong Gripping Power with Resistance 3M™ Plastic and Emblem Adhesive is a solvent-based adhesive that resists environmental exposure such as water and heat to maintain a solid bond. Made to dry clear, the adhesive can be used to bond transparent or translucent plastics (See packaging before use.)

3M™ Multi-Purpose Spray Lubricant is an ideal choice for general or all-around use. Our lubricant provides characteristics of both a lubricating and penetrating oil. It provides a demoisturizing coating to help protect metal surfaces from corrosion. This spray-on lubricant produces a thin bodied, transparent rust preventive coating that is low profile yet highly protective. Versatile, Spray-on Lubricant 3M™ Multi-Purpose Spray Lubricant is a specialized, long lasting formula that can be applied to almost anything on a vehicle to reduce rubbing effects and friction. It also protects metal from rust and corrosion. Our product offers potentially thousands of uses. The penetrant is commonly used to loosen metal parts that have fused together and are stuck to one another, usually as a result of rust or corrosion. It can even be used as a cleaner, such as removing grease and grime, and to silence squeaky parts. Electricians commonly use this product to displace water and to remove the moisture from electrical systems.

Protects bare metal panels and parts from corrosion after welding Zinc base draws away contact corrosion, leaving substrates strong Convenient aerosol spray application Dries in as little as 5 minutes before MIG welding for efficient throughput Formulated for minimum weld spatter, helping prevent shop damage Accepts 3M™ Cavity Wax Plus (PN 08852) and other 3M coatings on non-weld metal surfaces 3M™ Weld-Thru II is a convenient aerosol coating designed to prevent corrosion between welded metal surfaces. Featuring a zinc base that draws corrosion away from bare metals, it helps prevent costly comebacks due to corrosion at welds. Spray coating applies fast, resists weld spatter common to some weldable primers and dries in as little as 5 minutes, increasing shop efficiency and productivity. 3M™ Weld-Thru II May be used with 3M™ Cavity Wax Plus 08852 and 3M™ Cavity Wax Plus Applicator Wand Kit 08851Keeping Bonds Strong By preventing corrosion between welded auto body panels, our 3M™ Weld-Thru II promotes stronger business between your shop and your customers. This coating protects against corrosion untreated bare metal substrates (PDF, 155 Kb) — its zinc base uses the concept of bimetallic corrosion to keep metal parts from degrading. Welds stay strong, parts and panels don't corrode and you keep comebacks to a minimum. Tough on Corrosion, Easy for Welding 3M™ Weld-Thru II (PDF, 42 Kb) also helps keep collision repair shops operating efficiently. Its convenient aerosol can makes it fast and easy to apply, and features an actuator tip that resists plugging even after repeated use. The coating dries in as little as 15 minutes when using a resistance spot welder and as little as 5 minutes for MIG welding, helping technicians work faster and maximizing throughput. The formula also resists weld spatter than can cause burns to technicians or shop equipment.

General purpose lubricant for many applications Long-lasting lubricant coats moving parts Thick consistency won't drip or run when applied Lubricant resists washing off if exposed to road spray Aerosol can makes applications easy 3M™ White Grease is a heavy-bodied, lithium-grease based aerosol lubricant. It provides good performance under high friction loads, rubbing, and wiping action. It is excellent for general applications on all metal moving parts. One Lubricant for Many Applications When you need to lubricate moving parts, rely on our 3M™ White Grease. Our lithium-grease based lubricant leaves a thick, dense coating on the surface to make parts move more freely. Because of its thick consistency, our lubricant holds in place without freely dripping away. It even resists washing away when it comes in contact with water through road spray, rain, snow and sleet. Benefits of Lubricant When you apply this lubricant (PDF, 22 Kb), parts move with less friction and resistance, but they also experience less wear. A coating of lubricant also helps protect metal parts from rust and corrosion. Easy Application The aerosol can makes targeting the lubricant to the desired location simple and quick. An extension tube is supplied to make targeting tight spots easier.

3M Glass cleaner 250ml -Rs.1930/=

Reinforces the backside of bumpers needing repair No sanding needed for application and adhesion No cure time delay to proceed to front side repair Effective on many plastics where a reinforcement is needed Clean appearance for a good backside cosmetic finish Includes 6 flexible patches and 6 adhesion promoter packets 3M™ Flexible Plastic Patch, a popular repair material for automotive bumpers, reinforces the inside of a two-sided plastic repair where the damage has penetrated through the plastic material. Our flexible patch measures 4 inches by 8 inches and provides a strong backside reinforcement repair for most plastics. Includes 6 flexible TPO patches and 6 adhesion promoter packets. 3M™ Flexible Plastic Patch provides added strength to reinforce bumper repairs where the damage has gone through to the backside. Includes 6 flexible TPO patches and 6 adhesion promoter packets 3M™ Flexible Plastic Patch Simply cut the patch to repair size3M™ Flexible Plastic Patch provides added strength to reinforce bumper repairs where the damage has gone through to the backside. Our patching material is ideal for bumpers that have been cracked from a minor parking lot accident. When that happens simply patching the front side may not provide adequate strength. 3M™ Flexible Plastic Patch (PDF, 1.2 Mb) goes on the backside to stabilize the bumper. In addition to bumpers, our flexible TPO (Thermoplastic PolyOlefin) patches are also recommended for repairing wheel flares, splash shields and other cosmetic parts that are flexible or semi-flexible. Clean the area to be patched Apply adhesion promoter (included with patching material) Trim the patching material to the correct size Peel away the liner from the patching material Apply patch to the area to be repaired

Include anti-corrosive and anti-boiling elements, thereby protecting the cooling system and enhancing air conditioning efficacy. The product is suitable for both gasoline and diesel engines, available in red, green & blue

Durable yet flexible for automotive plastic panel repair and for matching OEM seam sealers Two-part epoxy adhesive is automatically metered for proper ratio Easily sandable in 15 minutes for a smooth finish without rework Paintable in as little as 30 minutes for increased vehicle throughput Works with 3M applicator guns and adhesion promoters for added speed and efficiency Our 3M™ EZ Sand Multi Purpose Repair Material is a ready-to-use 2-part epoxy finishing adhesive material that dries to a flexible hardness, ideal for repairing plastic parts such as bumper covers and body panels. It applies easily from a 3M applicator gun mixing nozzle, with no pre-mixing or measuring. It is quickly sandable for excellent featheredge, and paintable in as little as 30 minutes. With a finished surface that's hard and durable yet flexible, our 3M™ EZ Sand Multi Purpose Repair Material is the ideal finishing adhesive for repairing flexible and semi-rigid plastic parts such as auto body panels. The Dynamic Mixing System dispenses fillers, glazes, adhesives, sealers and plastic repair productsFast, Flexible and Easy to Sand With a finished surface that's hard and durable yet flexible, our 3M™ EZ Sand Multi Purpose Repair Material is the ideal finishing adhesive for repairing flexible and semi-rigid plastic parts such as auto body panels. This two-part epoxy finishing adhesive has a worktime of eight minutes and can be sanded with 180 grade abrasive in 15 minutes for an excellent featheredge across the entire repair area. The material is suitable for repairing scratches, gouges and deformations of flexible automotive exterior plastic parts including bumper covers. 3M™ Flexible Parts Repair Adhesive has also been tested and approved for use as a seam sealer over 2K primer, and is suitable for matching the appearance of OEM smooth seam sealer tape during automotive collision repair.

Soft foam construction conforms to contours for a finer finish • Adds support to disc pad for improved abrasive cut and closer edge sanding • Applies effortlessly between Hookit™ discs and Hookit™ back-up pads for quick changeouts • Hole configurations help clear dust from the work surface, increasing disc life • Reduces vibration from orbital sanding tool for improved results Our soft density foam 3M™ Hookit™ Soft Interface Pad adds cushion and conformability to our Hookit™ back-up pads for auto body sanding applications requiring precision across uneven surfaces. It increases abrasive cut and enables more consistent contact of abrasive discs around surface contours, plus the pad allows closer sanding to edges for smoother, more refined finishes. Extra Cushion for Precision Sanding

Quick-skinning, fast-curing and rapid-drying sealant for high-speed application Sealant remains flexible over time High solids adhesive provides low shrinkage for reliable results Common, easy-to-use cartridge system 3M™ Ultrapro™ Autobody Sealant is a heavy-bodied, solvent-based, seam sealer that adheres to painted metal, glass and aluminum. We formulated this autobody sealant to be quick-skinning, fast-curing and rapid-drying, making it ideal for applications that require speed and timeliness. In addition, this high-solids adhesive provides low shrinkage and remains flexible over time. For applications that require fast results, 3M™ Ultrapro™ Autobody Sealant is an excellent, heavy-bodied, solvent-based, seam sealer that is quick to skin, cure and dry. 3M™ Ultrapro™ Autobody Sealant is an excellent, heavy-bodied, solvent-based, seam sealer that is quick to skin, cure and dryRapid-Cure for High-Speed Applications For applications that require fast results, 3M™ Ultrapro™ Autobody Sealant is an excellent, heavy-bodied, solvent-based, seam sealer that is quick to skin, cure and dry. We designed this sealant to adhere to properly prepared primer and paint on meal, glass and aluminum. This product is a high solids adhesive that provides low shrinkage for consistent results. We engineered this seam sealer with a common, easy-to-use cartridge system. With a 5-10 minute worktime, this heavy-bodied sealant remains flexible over time and can be used for many applications, including door skins, rocker panels, rear body panels, trunk seams and floor pans. This product has a 45-minute dry time and is paintable at that point. Fast Performance for a Solid Seal As an excellent, heavy-bodied seam sealer, 3M™ Ultrapro™ Autobody Sealant is ideal for applications that require fast results. We formulated this sealant to meet the demands of a variety of external or non-passenger compartment sealing applications on automobiles. Leverage the high-speed features of our autobody sealant and enjoy the benefits that come from a sealing solution built for fast performance.

Premium paper backing resists breaking, lifting, and edge curl for ease of use and less material waste Developed to provide high conformability with clean removal and sharp paint lines Superior resistance to UV, moisture, and solvents compared to other paper tapes Release coating minimizes unwind force, reducing wrinkling and paint blow-by Our Scotch® Performance Green Masking Tape 233+ delivers consistently superior performance on moldings, plastic, glass, metal, rubber and paint. Balanced four-part construction includes flexible backing that applies easily around vehicle curves and contours and our patented adhesive that sticks at a touch, stays put and removes without transfer for consistently outstanding paint lines.

3M™ Complete Fuel System Cleaner is a high quality fuel tank additive that effectively cleans fuel injectors, intake valves, and combustion chambers - removing carbon, gum, resin and varnish deposits to help improve fuel economy and restore power. 3M™ Complete Fuel System Cleaner works in the time that it takes to consume one tank of gasoline (15 – 20 gallons). In addition to removing gums, resins and deposits, our fuel system cleaner can also protect against the carbon build up that occurs over time. With the increased use of lower and mixed qualities of discount gasoline, the need for cleaning your engine from the inside-out is becoming increasingly important. The build up of deposits affects engine performance, causing poor fuel economy, loss of horsepower, rough idling and hesitations when stepping on the gas pedal. These problems are often first noticed when starting the vehicle, after driving shorter distances or driving at lower speeds. By adding a quality fuel additive/cleaner, like 3M Fuel System Cleaner, it can prevent and even eliminate problems. Using our fuel system cleaner every 3,000 – 4,000 miles can keep the engine clean and running efficiently. Fuel system cleaners are a small investment in better automotive performance. Cleans the entire fuel system, including the fuel injectors, intake valves and combustion chambers Easy to pour bottle reduces chances of spills Helps restore lost horse power and fuel economy Helps to eliminate surging, stalling and hesitation due to dirty fuel injectors Designed to be used every 3,000 miles to maintain performance Also cleans gasoline direct injection (GDI) systems • Designed to clean intake valves and combustion chambers

Flexible baking with a consistent scratch pattern Great finish Long lasting and fast cutting Coated with a waterproof resin Available in 9” x 11” and 5-1/2” x 9” sheets for a variety of uses Durable yet flexible, the 3M™ Wetordry™ Abrasive Sheet, 401Q, levels minor dust nibs, and is great for adjusting mismatched orange peel on all automotive paints. Fast cutting and long lasting, this abrasive has a flexible backing with a consistent scratch pattern. For leveling minor dust nibs, adjusting mismatched orange peel, light sanding on acrylic lacquer paint, and other sanding jobs where burning or sanding through clear coat and paint are primary concerns, the 3M™ Wetordry™ Abrasive Sheet 401Q makes excellent results easier. It's durable yet flexible, with a sharp cut that leaves a refined finish. The durable paper backing helps create consistent patterns that are easily buffed out. Suggested Applications Ideal for paint finishing, paint defect removal and clear coat blending Levels minor dust nibs and for light sanding to adjust mismatched orange peel on all automotive paints Great for sanding old finishes, fine featheredging plus surface work

Recommended by many OEMs Provides corrosion protection with lifetime warranty Room temperature curing (accelerated curing with heat) Can be weld bonded or rivet bonded within working time Adheres to a wide variety of properly prepared steel and aluminum substrates May be used on many plastic and composite substrates Glass bead technology protects against overclamping and maintains a minimum bond line thickness Has excellent shelf life opened or unopened, reducing unused product replacement costs Our 3M™ Panel Bonding Adhesive is a cost-effective two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation. 3M™ Panel Bonding Adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP 3M Panel Bonding Adhesive provides a continuous bond and seals weld and rivet bonded areas against corrosions The result of years of development and testing, our 3M™ Panel Bonding Adhesive bonds and seals plastic and metal substrates including cold roll steel, aluminum, SMC, and FRP (traditional fiberglass). It is ideal for bonding quarter panels, roofs skins, box sides, van sides, utility vehicle sides and door skins — anywhere that requires a lasting bond for outer body panels - as specified by OEM. Many interior or other adjacent parts that must be removed to avoid damage from welding can remain installed when bonding. Note: Panel Bonding Adhesive should only be used to bond structural components such as pillars, rockers or frame members when specified by an OEM (Example: Aluminum Ford F-150). Unless specified by an OEM, structural components should be welded. See Standard Operating Procedures for Aluminum Body Repair (PDF, 3.09 Mb) Efficient Application Two-part panel bonding adhesive is available from 3M in cartridges from 50 mL to 400 mL, and works seamlessly with 3M manual applicator guns such as 08117 and the 3M pneumatic applicator gun 09930 for the 200ml cartridges. It applies quickly from the cartridge with no pre-mixing or measuring. The adhesive contains glass beads which reduces excessive squeeze-out and makes it easy to form consistent bondlines. A work time of up to two hours and the added heat-assisted on-demand curing allows for accurate application, squeeze-out sealing and cleanup. The bonding adhesive also has an excellent shelf life even after it's been opened, reducing the cost of replacing unused product. Better Science for Better Bonding from 3M 3M™ Panel Bonding Adhesive is the result of years of laboratory development and field testing. Our scientists pioneered "bondline control" in the collision repair market, incorporating glass beads into our adhesive formula that work as built-in spacers for optimal bond line thicknesses. Our adhesive cartridges, together with our manual and pneumatic applicator guns and mixing nozzles, form a system that eliminates pre-mixing or measuring of two-part epoxies. The ability to bond effectively results in a more versatile, cost-effective shop.

Features 3M™ Precision-Shaped Grain, triangular-shaped grains that cut at least 30% faster and last at least 30% longer than other conventional ceramic abrasives 3M™ Hookit™ hook-and-loop style abrasive attaches firmly, removes quickly for fast change-out Precision-Shaped Grain (PSG) technology employs microreplication to obtain sharp and uniformly sized triangular grain Triangular PSG abrasive grains are sharp and cut exceptionally fast Our 3M™ Cubitron™ II Hookit™ File Sheets 737U combines the highest 3M technology for automotive repair. Its long-lasting triangular shaped grains make the sheet ideal for paint stripping, rough shaping of body filler and sanding plastic filler. Our Hookit™ system makes for quick change-outs of abrasive sheets. We developed our Cubitron™ II Hookit™ File Sheets 737U for superior cut and long life during key stages in auto body repair. Its long lasting triangular shaped grain and multi hole pattern for superior dust extraction make the sheet ideal for paint removal, rough body filler shaping, fine feather edging or final prep before blending or priming. Our Hookit™ system makes for quick change outs of abrasive sheets. This abrasive is ideal for feather edging, as a final sanding step before priming, or during prep before blending. Cubitron™ II and Precision-Shaped Grain Cubitron™ II abrasive discs, file sheets and sheet rolls have raised the bar for high-performing abrasives. Cubitron™ II abrasives feature our Precision-Shaped Grain (PSG) technology, which helps provide faster cut. The result: Cubitron™ II cuts at least 30% faster and lasts 30% longer than conventional ceramic abrasives. About Hookit™ Attachment 3M offers a complete range of hook and loop style Hookit™ abrasives for work spaces where adhesive backed products may become contaminated by dust, dirt, or flying debris. Hookit™ sanding abrasives conveniently and firmly attach to a hook and loop backup pad (sold separately), can be removed cleanly and easily, and can be reused again and again for the extent of the abrasive life

Machine polish designed to remove compound swirl marks and other minor surface defects. Proven performer. Removes Tough Swirl Marks 3M™ Machine Polish eliminates challenging swirl marks that can occur on automotive finishes. 3M™ Machine Polish also refines other scratches that occur from car washes and daily use. Our 3M™ Machine Polish cuts out these abrasions and other minor surface defects when applied with a 3M™ Foam Polishing Pad. Our polish quickly removes compound swirls caused by wool pads. Versatile Polish Works with Today's Automotive Paints Our 3M™ Machine Polish formula contains no waxes or silicones. It is compatible with all types of paints and is clear coat safe. Our formula requires less clean up than many competitive products. Formulated to remove compound swirl marks Leaves a swirl-free finish when applied with a 3M™ Foam Polishing Pad Formulated for vehicles with dark color paints Easy clean up, contains no waxes or silicones

Multi-purpose undercoating may be applied to cars, truck and recreational vehicles Sound deadening properties help reduce road noise Anti-corrosive coating protects the undercarriage of vehicles from rust and abrasion Excellent spray pattern 3Ms Fastest Drying Formula

Help prevent fading of tyres. Non-greasy formula does not attract dust. Long lasting gloss Restores gloss Stay longer against Environmental exposure

3M’s highest-performing machine polish for removing swirl marks after compounding Produces a refined, polished finish to painted surfaces Longer wet time – less product is required for each use, saving money Holds better on polishing pads for reduced sling, mess and cleanup time Part of the 3M™ Perfect-It™ Paint Finishing System for showroom grade finishes Our 3M™ Perfect-It™ EX Machine Polish is the highest-performing machine polish we’ve ever introduced for removing compound swirl marks in collision repair. It stays wet longer, letting you use less polish for the same refined finish. Yet it also holds better on the pad for reduced sling and easier cleanup. You get smooth, polished surfaces without compound swirl marks – faster, and at less cost. 3M™ Perfect-It™ EX Machine Polish Available in a variety of sizesMore Wet Time, Less Sling You never thought one machine polish could deliver both of these important advantages — until now. Our 3M™ Perfect-It™ EX Machine Polish stays wet longer on the substrate, meaning you don't need to keep reapplying it and using valuable material during the process of compound swirl removal and polishing. This can be especially important in places where heat and humidity are common inside or outside of the shop. Yet the polish also holds better on the pad, reducing the mess, waste and cleanup time associated with sling. Quite simply, our Perfect-It™ EX Machine Polish (PDF, 721 Kb) is our highest-performing machine polish for better material cost efficiency, lower process times and refined, swirl-free finishes after compounding.

3M™ Overspray Protective Sheeting is a paintable, high density and tear-resistant translucent film for critical edge masking as well as for paint overspray. We make our overspray protective sheeting in a variety of sizes to protect various types of vehicles, including cars, vans, sport utility vehicles and trucks. 3M™ Overspray Protective Sheeting shields cars, trucks or vans from overspray while being repainted. Our specially formulated high density polyethylene film (HDPE) offers excellent paint adhesion and paint overspray adhesion. It resists paint flaking, which eliminates the need for masking paper at the critical paint edge. The sheeting clings to vehicle and has center printing for easy alignment, which makes it easy to handle. Sheeting easily cuts to any size needed for a project. Using overspray protective sheeting eliminates the need for masking paper to skirt the lower part of the vehicle. Our protective sheeting protects a variety of dry surfaces in addition to vehicles. Protective sheeting is perfect for protecting floors, walls, cabinets, stationary tools or any other object found in a automotive body shop or garage. Using 3M™ Overspray Protective Sheeting can eliminate costly and labor intensive cleanup and rework due to paint that reaches locations other than the intended target area. Paint overspray can significantly degrade the quality of the finished product, adversely affecting gloss and contributing to orange peel. Protective sheeting is a simple and inexpensive way to manage and control the impact of overspray. • Protects vehicles from overspray • High-density, durable film provides excellent paint overspray adhesion • Good tear resistance keep sheet intact during painting • Reduces costs associate with removing overspray • Use with 3M™ Overspray Protective Sheeting Masker

Specialty adhesive bonds replacement windshields securely to auto bodies One-part urethane adhesive requires no mixing Fast-curing formula offers a 10 to 20 minute working time Strong-gripping power offers a permanent bond Packaging designed to work with either manual or powered caulking guns 3M™ Windo-Weld™ Super Fast Urethane securely bonds replacement auto glass to car bodies, including windshields, backlites and sidelites. Formulated for convenience, our medium viscosity adhesive is a single-component, moisture-curing product that requires no mixing, which is an advantage because many windshield replacements are done at the customer's location away from the shop. 3M™ Windo-Weld™ Super Fast Urethane One-part urethane adhesive requires no mixing Securely Set Windshields in Place 3M™ Windo-Weld™ Super Fast Urethane delivers a secure and permanent attachment of the replacement windshield. We use the word "weld" in the name to symbolize how strong the bond will be. A popular choice among auto glass installers, 3M™ Windo-Weld™ Super Fast Urethane delivers the reliable performance that meets customer satisfaction. When properly applied, our adhesive prevents annoying leaks where rain and water can seep into the vehicle between the windshield and auto body. 3M offers manual applicator guns with an 18:1 ratio, including the 3M™ Professional Caulking Gun - part number 08993 Packaging designed to work with either manual or powered caulking guns Your Choice: Manual or Power Caulking Guns Our adhesive may be applied with either a manual or powered caulking gun. 3M offers manual applicator guns with an 18:1 ratio, including the 3M™ Professional Caulking Gun - part number 08993. Electric, battery or air-operated caulking guns may also be used. Adhesive offers a 10 to 20 minute work time.

A basic tool for consistently applying products Flexible body and sharp edge allow for easy and accurate body filler spreading Reusable – cured filler pops off with a simple twist Non-absorbent 1-piece construction keeps spreader clean and ready for use, saving time and material costs Designed specifically for collision repair professionals Our 3M™ Spreaders are specifically designed for spreading body and fiberglass fillers, finishing putties and resins. This spreading tool is flexible, yet rigid enough to be easily grasped even through protective gloves. Its sharp edge makes for precise application. And cured body filler pops off the non-absorbent spreader with a simple twist, saving cleanup time and making for long product life. The Basics for Excellence in Collision Repair Specially designed for use in collision repair shops, our 3M™ Spreaders are basic tools with big benefits. These durable body filler spreaders are easy to hold and even easier to use. The spreader combines flexibility with a sharp edge, making it ideal for applying, spreading, shaping and smoothing a variety of mixed body fillers, resins and finishing putties for consistently excellent auto body work. Each body filler spreader is also reusable, which means less money spent on materials in the shop. And its combination of flexibility and rigidity makes for very little cleaning time. Once body filler cures on the spreader, simply give it a twist. The cured material pops off and leaves the spreader ready for the next use. And non-absorbent 1-piece construction keeps it that way for long product life.

A best-in-class abrasive for a variety of applications Engineered ceramic mineral blend is balanced for maximum abrasive performance in its class Discs available in mutli-hole pattern for excellent dust extraction or in no-hole format Anti-loading coating prevents dust and debris from clogging the cutting surface Upgraded resins improve durability and finish Our 3M™ Hookit™ Blue Abrasive Disc 321U delivers best-in-class performance at every stage of paint prep and coatings removal. Premium aluminum oxide mineral abrasive is blended with ceramic grain for a full range of sanding applications. Our multi-hole discs feature a specially-designed pattern that reduces loading, extends disc life and aligns with most backup pads. Hookit™ attachment makes disc changes easy. Best-in-Class Performance in Every Grade Part of our full line of 3M™ Blue Abrasives, the 3M™ Hookit™ Blue Abrasive Disc is engineered for best-in-class cut, life and efficiency across your entire shop. The disc features a tough ceramic blended with premium aluminum oxide mineral for just the right balance. 3M™ Blue Abrasives deliver consistently excellent results in a minimum amount of time, on jobs ranging from aggressive paint removal and fresh filler sanding to blend preparation and sanding primer. Discs are available in a wide range of sizes and grades. Dust Extraction and Anti-Loading Features Enhance Performance and Life The multi-hole pattern discs are specially designed to capture dust and keep it away from the abrasive surface. This specially-designed hole pattern reduces loading and extracts dust more efficiently compared to standard 6- or 7-hole disc configurations. It includes alignment guides across the disc, making it fast and easy to align with nearly any backup pad. The mineral blend on the 3M™ Hookit™ Blue Abrasive Disc is bonded using upgraded resins for enhanced durability. An anti-loading coating helps keep dust from gathering between the abrasive grains for a faster cut and for consistent performance throughout the life of the disc.

* Formulated to remove compound swirl marks • Leaves a swirl-free finish when applied with a 3M™ Foam Polishing Pad • Formulated for vehicles with dark color paints • Easy clean up, contains no waxes or silicones 3M™ Machine Polish effectively removes compound swirl marks and minor surface defects to restore the beauty of automotive finishes. It leaves a swirl-free finish when applied with a 3M™ Foam Polishing Pad, PN 05725. 3M™ Machine Polish contains no waxes or silicones. This machine polish quickly removes compound swirl marks even on dark colored vehicles. 3M™ Foam Polishing Pad produces wheel- and swirl-free paint finishes when used with 3M Machine Polish Removes Tough Swirl Marks 3M™ Machine Polish eliminates challenging swirl marks that can occur on automotive finishes. 3M™ Machine Polish also refines other scratches that occur from car washes and daily use. Our 3M™ Machine Polish cuts out these abrasions and other minor surface defects when applied with a 3M™ Foam Polishing Pad. Our polish quickly removes compound swirls caused by wool pads. Versatile Polish Works with Today's Automotive Paints Our 3M™ Machine Polish formula contains no waxes or silicones. It is compatible with all types of paints and is clear coat safe. Our formula requires less clean up than many competitive products.

Dry guide coat reveals surface imperfections such as pinholes and scratches Dry consistency requires no masking and requires no drying time Product may be used in both wet or dry sanding Contains no intentionally added solvents Powder is ideal to highlight body lines 3M™ Dry Guide Coat is used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application. The dry formula contains no intentionally added solvents and doesn't clog sandpaper while delivering easier cleanup. 3M™ Dry Guide Coat is used in the dry primer sanding process to identify surface imperfections such as pinholes and deep scratches in primer. With Dry Guide CoatReveal Imperfections that Escape the Unaided Eye 3M™ Dry Guide Coat is used in the dry primer sanding process to identify surface imperfections such as pinholes and deep scratches in primer. When sanding polyester filler, it ensures the filler is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. Using this product prior to priming and sanding will save you rework later when surface imperfections would otherwise appear. Without Dry Guide CoatCheck Now Before Discovering Problems Later Using this product prior to priming and sanding will save you rework later when surface imperfections would otherwise appear. You get superior visualization so you can correct problems early before they become bigger problems later. Once blemishes become evident after priming or painting, you have a choice to compromise the quality of the job or do costly rework. 3M™ Dry Guide Coat saves you from that tough decision. Versatility of Dry Guide Coat Our dry guide coat is a carbon black powder that can be used on automotive and marine fillers, primers, paints and gelcoats. It may be used for either wet or dry sanding. The powder contains no intentionally added solvents that can cause painting problems

Medium Color Stable film is the standard in the automotive market. Becoming one of the most popular films in the line, CS 35 allows 38% of visible light through the glass. It rejects heat, reduces glare and retards interior fading. Reduces Heat: Up to 57% TSER Non-metallized — No Signal Interference Blocks up to 99% UV Rays Never Turns Purple Reduces Glare Blocks up to 99% of harmful ultraviolet (UV) light to provide up to 1000 SPF Non-metallised to keep you connected with mobile devices, GPS or satellite radio reception without interference Outstanding colour stability – never turns purple

Sized for easy use and to accept a variety of abrasive sheets Soft material supports abrasives for consistency and control Durable pads hold up during wet or dry sanding Can be used on either side, making for easier sanding and longer pad life Promotes excellent results in auto body paint finishing 3M™ Wetordry™ Sponge Pads are excellent for making hand sanding easier and more efficient in collision repair. The soft hand sanding pads provides flexible and long-lasting support for 3M™ sanding sheets such as a 3-fold wrap of 3M™ Silicon Carbide Paper Sheets, Wetordry™ Color Sanding Paper Sheets or Production™ Paper Sheets during wet sanding or dry sanding. The Support You Need for Excellent Results The 3M™ Wetordry™ Sponge Pad provides just what you need to achieve excellence in collision repair: the right level of support. Its 2-3/4” x 5-1/2” x 3/8” size fits neatly in your hand and readily accepts paper sanding sheets on either side, making it easy to hold and use. Its material provides the ideal support for abrasive sheets – strong enough to hold up during aggressive sanding, yet soft and flexible to promote control and consistent contact across the sanding surface. Technicians can dip the entire sheet and pad into a bucket for wet sanding, or wrap sized sheets around the pad for added support during dry hand sanding. The Right Tool for the Job Like us, you pay a lot of attention to the tools you choose for auto body repair and maintenance. Our 3M™ Wetordry™ Sponge Pad is the right tool for wet and dry sanding during auto body paint finishing, with soft yet durable construction and a size that readily accepts a variety of 3M abrasive sheets. Another small tool that delivers big advantages in collision repair. Two Big Benefits of Using Our Sanding Blocks Our 3M™ Wetordry™ Sponge Pad serves dual purposes of making the job of sanding go easier and the results better. This auto shop accessory is the product of seeking innovative ways to boost efficiency and effectiveness on the job.

Corrosion protection for internal body panels, frame rails and structural enclosures Non-hardening material remains soft and pliable – will not crack, chip, or peel Use with 3M™ Cavity Wax Plus Applicator Wand Kit (sold separately) to ensure 360° coverage in closed cavities Convenient aerosol spray can eliminates need for bulk spray equipment Self-healing formula reflows into cracks and crevices for long-term coverage All OEMs recommend the application of internal anti-corrosion material during body repair, which includes cavity wax 3M™ Cavity Wax Plus 08852 is a non-hardening, self-healing corrosion protection coating for internal auto body panels and structural enclosures, as well as new replacement parts. It is designed to cover and seal internal joints, hem flanges and other areas where OEM e-coat may be compromised. It will not chip, peel or crack. Use the 3M™ Cavity Wax Plus Wand Kit for 360° coverage. Display of product kit. Access hard-to-reach places when applying corrosion protection coatings.Protects Against Corrosion in Internal Automotive Panels Developed specifically for corrosion protection on internal automotive panels and structural components, our 3M™ Cavity Wax Plus 08852 is formulated to coat and seal areas such as door skins, rocker panels, interior quarter panels and frame rails. It is excellent for use wherever OEM e-coat may be compromised during the repair process, as well as on new replacement parts. It is formulated for use on bare or primed automotive metals including steel and aluminum to protect critical interior joints, hem flanges and repair welds where moisture can form over time. The non-hardening internal corrosion protection material remains soft and pliable and will not crack, chip or peel. Spray-on material applies quickly and easily from an aerosol can, and eliminates the need for bulk spray equipment. Use 3M™ Cavity Wax Plus with our 3M™ Cavity Wax Plus Applicator Wand Kit (PN 08851, sold separately) in hard-to-reach locations.

Our highest-performing foam compounding pads Works with 3M™ Hookit™ and Quick Connect attachment systems for easy change-outs Diameters as small as 3” for accuracy in tight spaces or small areas Foam construction holds polish, prevents slinging for faster, cleaner results Part of the 3M™ Perfect-It™ Paint Finishing System for showroom grade finishes Our 3M™ Perfect-It™ Foam Compounding Pads are our highest-performing foam compounding pads for refining sand scratches, slow-speed polishing, denibbing and more. Foam face pattern provides more surface contact, holds compound better and reduces slinging. Doubled-sided pads work with 3M™ Quick Connect Adaptors on rotary polishers; double-side pads work with our Hookit™ system for easy change-outs. 3M™ Perfect-It™ Foam Compounding PadFor the highest performance at every step during auto body compounding, our 3M™ Perfect-It™ Foam Compounding Pads combine features that save time and improve results — for each job, and in your auto body operation. Pad face patterns are designed into the foam to hold more compound and limit slinging, as well as provide more contact with the surface for maximum efficiency. Double- and single-sided constructions work with our Quick Connect and Hookit™ attachment systems to save time and preserve pad life. Choose a 3-, 6- or 8-inch diameter pad for a variety of specific applications including working with cured, hard or medium finish paint, denibbing, scratch removal and refining P1200 or finer sand scratches even in confined spaces.

Versatile adhesive that bonds a wide range of lightweight materials Provides professional, industrial strength for demanding applications Offers a fast, aggressive tack for a quick bond that reduces set time Bonds paper, cardboard, fabric, insulation, plastic, metal, wood and more Allows for a bond time of 15 seconds to 30 minutes Repositionable while providing long-lasting strength We invented 3M™ Super 77™ Multipurpose Spray Adhesive to be an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. Our permanent bond provides fast results to keep projects moving ahead. The photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time. The Glue that Holds the World Together For more than 50 years, 3M™ Super 77™ Multipurpose Spray Adhesive has remained a staple in 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. Recognized worldwide, this spray adhesive has demonstrated its reliability in countless applications. For many, "getting the job done" is just a spray away. Our 3M™ Super 77™ Multipurpose Spray Adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to find the best fit for your parts. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The combination of fast tack, strong bond and clean appearance make it ideal for projects of all kinds.

3M’s best-performing rubbing compound for removing P1200 or finer sand scratches Formulated for a broad range of user conditions without sticking or leaving residual film Works especially well on many newer, harder to buff clear coats Smooth-handling compound reduces powdering and leaves a refined finish on all auto paint surfaces Holds better on compounding pads for reduced sling, mess and cleanup time Part of the 3M™ Perfect-It™ Paint Finishing System for showroom grade finishes 3M™ Perfect-It™ EX AC Rubbing Compound is our best-performing rubbing compound for removing P1200+ sand scratches and surface defects before polishing, even on the latest clear coats. It is formulated to perform in all conditions, including high heat and humidity, without sticking to panels or leaving film residue. It delivers a longer working time, yet still reduces sling for easier cleanup. 3M™ Perfect-It™ EX Rubbing Compound This unique formula offers the highest level of performanceLonger Working Time, Easier Cleanup Even in Extreme Conditions As part of a complete system for creating showroom-grade finishes, our 3M™ Perfect-It™ EX AC Rubbing Compound is the ideal compound for the critical pre-polishing stage in collision repair. This fast-cutting, fine-finishing compound removes fine grade (P1200 or finer) sand scratches and small surface defects on automotive painted surfaces. The compound works especially well on newer, harder-to-buff clear coat systems. It is formulated for longer work times, even in extreme conditions — especially important in places where heat and humidity are common inside or outside of the shop. The rubbing compound won't become sticky during use or leave a powder or film residue that can cause rework. Yet it holds on the compounding pad, reducing the mess, waste and cleanup time associated with sling. This rubbing compound is available in a range of quantities including convenient, job-sized packets for maximized product use and inventory control. Quite simply, our Perfect-It™ EX AC Rubbing Compound is the highest-performing rubbing compound 3M has introduced for better efficiency and lower process times, both during use and through creating defect-free surfaces prior to polishing. An Excellent Finish, Fast At the heart of this specially formulated polish is aluminum oxide, the same mineral used in many of our top-performing abrasive discs and sheets. In fact, fine grade aluminum oxide abrasive discs are part of the Scratch Refinement stage of our Perfect-It™ Paint Finishing System, which includes our EX AC Rubbing Compound. This rubbing compound cuts quickly and uniformly to remove fine sand scratches and surface defects. 3M™ Perfect-It™ EX Rubbing Compound is the ideal compound for the critical pre-polishing stage in collision repair. Use 3M™ Perfect-It™ EX Paint Finishing System for optimal performance every time Part of the 3M™ Perfect-It™ Paint Finishing System 3M™ Perfect-It™ EX AC Rubbing Compound is integral to our 3M™ Perfect-it™ Paint Finishing System. Developed to keep pace with evolving paint and clear coat technologies, the Perfect-it™ Paint Finishing System is ideal when the finest finish is required for every level of clear coat and paint repair. This system uses a progressive series of abrasives, buffing and compounding pads, and specially formulated compounds and polishes across four stages of repair to produce showroom grade finishes with deep color and rich gloss. 3M™ Perfect-It™ EX AC Rubbing Compound is crucial for the Perfect-it™ Paint Finishing System, after scratch refinement and prior to polishing.

cotchgard™ Paint Protection Film Pro Series (also known as clear bra) offers: Clear car paint protection Unrivaled scratch and stain resistance Custom designed clear bra patterns to fit your vehicle Self-healing technology, which makes most scratches disappear Tough, durable and maintenance free Backed by a ten year warranty

eatures 3M™ Precision-Shaped Grain, triangular-shaped grains that cut at least 30% faster and last at least 30% longer than other conventional ceramic abrasives Clean Sanding multi-hole pattern delivers excellent dust extraction 3M™ Hookit™ hook-and-loop style abrasive attaches firmly, removes quickly for fast change-out Kiss-cut scoring technology allows for use in multiple sheet lengths Sharper cutting surface means less pressure is required Grains are electrostatically oriented on abrasive surface for efficient cut Our Cubitron™ II Hookit™ Clean Sanding Sheet Rolls 737U combines the highest 3M technology for automotive repair. Its long-lasting triangular shaped grain and multi-hole pattern for superior dust extraction make it ideal for paint removal, rough body filler shaping, fine feather-edging or final prep before blending or priming. Our Hookit™ system makes for quick change-outs of abrasive sheets. Cubitron™ abrasives feature Precision-Shaped Grain (PSG) technology, which allows engineers to control the geometry of the abrasive grain for a truly fast, efficient cut. Kiss-cut scoring technology allows for use in multiple sheet lengthsOur 3M™ Cubitron™ II Hookit™ File Sheet 737U was developed for superior cut and long life during key stages in auto body repair. Its long lasting triangular shaped grain and multi hole pattern for superior dust extraction make the sheet ideal for paint removal, rough body filler shaping, fine feather edging or final prep before blending or priming. Our Hookit™ system makes for quick change outs of abrasive sheets. This abrasive is ideal for feather edging, as a final sanding step before priming, or during prep before blending.

Our 3M™ Trim Masking Tape lifts and protects trim moldings during auto body masking, eliminating overspray and visible paint edges. A rigid band along one edge slips gently behind the molding, lifting it slightly from the body. Paint flows under the molding while its exterior stays masked for a professional, finished paint job without removing or replacing the moldings or rework for paint lines. Faster, More Cost-Effective Trim Masking Auto body professionals seeking a clean, uniform finished appearance when painting around pliable vehicle moldings will appreciate our 3M™ Trim Masking Tape. This tape is designed for masking around flush mount windshields and back glass, side moldings, inset door handles and tail light assemblies, as well as sidelight and headlight units. Technicians get a fast, professional paint job, with no sharp paint edges and without the added time and expense of removing, replacing or cleaning existing moldings. A Gentle Lift for a Big Drop in Material and Labor Costs 3M™ Trim Masking Tape features a hard band along its edge that slips quickly and easily between trim moldings and auto body surfaces. The translucent liner on the adhesive side is removed and the tape is folded over and adhered. This slightly lifts the molding, and provides a reliable mask that prevents overspray. As technicians spray over the masking, the paint flows into the small gap between the molding and the paint surface and covers beneath the molding itself. When the masking tape is removed, the molding simply drops on top of the fresh paint – no visible paint edges, and no need to spend extra time removing paint lines from trim after painting. Best of all, you can mask around trim in very little time without having to remove or replace any of the existing moldings for savings on labor and materials. Ideas that Make a Difference Our 3M™ Trim Masking Tape is another example of how a product that seems common can save an uncommon amount of time and money in automotive aftermarket maintenance and repair. We designed this masking tape specifically for quick, effective masking around auto moldings, and as a solution for creating a professional finished appearance in less time, for less money. It’s another example of what 3M does best: Science. Applied to Life.™ Translucent tape with a liner makes precise placement easier, helping eliminate overspray Hard band at the tape edge slightly lifts moldings from the body, concealing sharp paint edges Speeds paint time – no need to remove or clean auto body moldings Helps reduce replacement of existing moldings, saving money Several available hard band widths help you choose the right tape for the right job

Provides a tough barrier and protects metal from road debris • An aerosol undercoating with smooth texture in two forms, paintable and non-paintable • Multi-purpose undercoating may be applied to cars, trucks and recreational vehicles • Hides welding marks and other repairs • Sound dampening properties help reduce road noise Our 3M™ Undercoating protects vulnerable automotive metal parts from corrosion and abrasion. Specifically designed for automotive undercarriages, wheel wells and body panels — quarter panels, under hoods, trunks, undersides of floor pans — it's equally effective in many other automotive applications. Multi-purpose aerosol undercoating is available in a rubberized formula that can be painted.

We developed our 3M™ Detailing Squeeze Bottle for efficiently storing and dispensing auto body polishes, compounds, glazes, liquid wax and solvents. Fluorinated high density polyethylene construction resists paneling and helps preserve the integrity of common auto shop compounds. Squeeze bottle includes a removable spout top for easy dispensation and a cap to prevent spillage. Originally developed to help dispense and preserve the integrity of 3M™ polishes, our 3M™ Detailing Squeeze Bottle is ideal for auto body repair specialists to cost-effectively store and dispense a variety of compounds. Suitable for materials commonly used in auto body repair and maintenance such as polishes, glazes and liquid wax, the bottle is made from high density polyethylene which is fluorinated to a Fluoro-Seal Level 3 or a NAMPAC Ultra High Level or equivalent. This material resists paneling and chemical permeation, prevents the loss of compound weight and resists the absorption of color or odor, allowing technicians to store polishes and compounds in the bottle and keep them conveniently on hand. At the same time the Detailing Squeeze Bottle is flexible and allows for easy dispensation of product with a simple squeeze. A spout top twists off for easy refills. A red cap keeps contaminants away from compounds and prevents spillage. Ideal for auto body shops – originally developed to preserve integrity of 3M™ polishes Fluorinated to reduce permeation, discoloration and paneling Easy "ketchup bottle” style squeeze dispensation Convenient 355 ml size is easy to hold and use Safe, long-lasting and cost-effective squeeze bottle for auto shop polishes and compounds

The 3M Perfect-It 1-Step Finishing Compound is a powerful 100g formula designed to effectively remove minor scratches, swirls, and surface blemishes from your vehicle's paint. With its easy application process, this compound restores gloss and shine, making it a must-have for any car enthusiast looking to maintain their vehicle's pristine appearance.

3M™ Perfect-It™ Back-up Pad allows for easy attachment, quick removal and accurate centering of compounding or polishing pads. We used our 3M™ Hookit™ attachment system for these pads to enhance convenience and boost productivity with quick change of abrasive discs. Advantages ranging from greater convenience to better performance 3M™ Perfect-It™ Back-up Pad addresses the need for auto body shops to achieve professional-level results while boosting overall shop productivity. Our back-up pad delivers on multiple counts including providing a quick-change advantage and producing exceptional finishes on today's automotive paints. Our pad provides a secure, no-slip attachment, yet allows for easy removal of abrasive discs when necessary. We recommend this pad for producing professional quality finishes on gelcoat and paints. Part of the 3M™ Perfect-It™ System These back-up pads are all part of our 3M™ Perfect-It™ system, which delivers better overall finishes with deeper color and gloss. When used with compounding pads, it will help remove defects with greater thoroughness and less time. The backup pad provides cushioning support to help smooth and refine an automotive finish. That same support will help polish surfaces to a high gloss. Enjoy the Ease and Speed of the Hookit Attachment System Our back-up pad uses the 3M™ Hookit™ attachment system for easy replacement of abrasive discs. Simply press on the abrasive disc to get a secure grip, and then peel it away for easy removal. Hookit™ is the perfect time-saving answer when you're switching between abrasive grits frequently. Best of all, you can remove and reattach an abrasive that still has a useful service life. Let's say you need to switch to a different grit but the abrasives on the disc you're currently using are not fully spent. Simply remove it and reattach later. Hookit™ ensures that you will get the same secure hold, which is an important advantage compared to pressure sensitive discs where the adhesive may be compromised by dust and air after the disc has been removed. Backup pad supports single-sided compounding or polishing pads Provides a firm attachment, yet allow for easy removal of abrasive disc Centers compounding or polishing pads with great accuracy Part of the 3M™ Perfect-It™ System 3M™ Hookit™ attachment system allows for simple disc changes 3M™ Hookit™ attachment system provides easy disc changes and optimizes disc life

Replicate natural sunlight to better match automotive & industrial paint colors Evaluate damage for better estimates of cost of repair Locate defects prior to painting vehicle or substrate Identify imperfections in paint quality Improve the professionalism of automotive & industrial paint jobs 3M™ SUN GUN™ II Light Kit provides a light source that replicates natural sunlight, allowing technicians to better match paint colors. The 3M™ SUN GUN™ II can also help identify pre-painting defects such as pin holes and scratches as well as post-painting defects such as swirls marks, burn through, sand scratches and dirt nibs.

3M™ Wetordry™ Abrasive Sheet 401Q is designed for sanding applications that require a fine grit and a light touch, such as auto body wet sanding and paint finishing. It combines our durable, waterproof A-weight paper backing and our fast-cutting silicon carbide mineral for consistent scratch patterns, making for easier buffing. A range of grades up to 3000 grit allows for superior results. For Excellent Results, When Excellent Results Aren't Easy For leveling minor dust nibs, adjusting mismatched orange peel, light sanding on acrylic lacquer paint and other sanding jobs where burning or sanding through clear coat and paint are primary concerns, our 3M™ Wetordry™ Abrasive Sheet 401Q makes excellent results easier: it’s durable yet flexible, with a sharp cut that leaves a refined finish. The durable paper backing helps create consistent patterns that are easily buffed out. And the silicon carbide grain is available in grades from 1000 up to 3000 for a full range of non-aggressive sanding and polishing jobs on clear coat, plastic and metal, including areas that require hand compounding and for sanding dark colored paints. Choose sheet sizes of 5-1/2 x 9 inches or 9 x 11 inches to suit specific sanding jobs and reduce the need for tearing. Light, Smooth, Waterproof Backing Our 3M™ Wetordry™ products are backed with a durable waterproof paper backing that supports wet and dry applications. Lighter weight than cloth and smooth rather than textured, the paper backing is preferable for lighter applications such as finishing and paint prep. At the same time, many such applications produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects can be minimized by sanding with water to rinse dust away. Our Fastest-Cutting Abrasive Mineral Silicon carbide is a very hard mineral that cuts extremely fast. In fact, it is our fastest-cutting mineral abrasive. It features sharp points that fracture easily, resulting in freshly exposed sharp edges that produce a smooth, professional-looking finish. The mineral has a shorter life, but it produces a superior finish. More Effective Sanding for More Effective Operations We put plenty of science behind our 3M™ Wetordry™ Abrasive Sheet 401Q – and not just to improve your finished work. These abrasive sheets make the entire sanding process easier, from the durability of each sheet during wet sanding to faster cutting to easier buffing for faster production times and less labor cost. It’s another way that 3M helps auto body professionals get the most from their operations. Convenient sheet can be used wet or dry on paint, primer, gel coat and metal Waterproof backing supports wet applications for decreased loading and a faster cut Silicon carbide mineral is 3M's fastest-cutting abrasive for a superior finish Range of fine grades from 1000 up to 3000 for the most professional results Available in 9” x 11” and 5-1/2” x 9” sheets for a variety of uses

A disc pad for improved productivity during heavy duty sanding applications • Patented multi-hole pattern maximizes dust extraction • 1/2 inch firm density foam provides plenty of support for aggressive sanding • 15 degree tapered edge delivers high sanding performance, especially on flatter surfaces • 5/16-24 external threads are compatible with orbital or random orbital sanders • Hookit attachment provides excellent backing support and easy reuse, optimizing disc life Our 3M™ Hookit™ Clean Sanding Abrasive Disc Pad combines some of our most advanced technologies to handle even aggressive auto body sanding jobs. This firm density, 1/2-inch foam pad features our Clean Sanding hole pattern for effective dust evacuation with 6-hole discs. Hookit™ attachment makes disc change-out fast and easy, and maximizes disc life. Hookit attachment provides excellent backing support and easy reuse, optimizing disc life A Firm Base for Heavy Sanding We designed our 3M™ Hookit™ Clean Sanding Abrasive Disc Pad for long life even during heavy duty auto body sanding and refinishing. The 6-inch diameter, 1/2-inch thick foam body is density rated firm, with a 15-degree taper for flat sanding and for more aggressive applications. The disc pad features 5/16-24 external threads which are compatible with most orbital or random orbital sanders.

Designed for creating seal between rubber windshield gasket and auto body Non-hardening synthetic rubber-based formula is ideal as a glass bedding Suitable for use as supplementary sealer for auto glass Non-sagging properties are excellent for overhead and vertical auto seals One-part sealer applies without mixing and cleans quickly with a dry rag Our 3M™ Auto Bedding and Glazing Compound is a flexible sealer designed specifically for creating a watertight seal between windshield rubber gaskets and auto bodies. This synthetic rubber-based sealer remains permanently soft, making it suitable as a bedding and a supplementary adhesive sealer for auto glass. It also resists sagging for use in vertical and overhead auto seals. 3M™ Auto Bedding and Glazing Compound is non-hardening and stays permanently soft to make an ideal bedding for auto glass such as windshields. Applies right from the cartridge Designed Specifically as a Glass Adhesive and Auto Seam Sealer Featuring a pliable formula that applies easily right from the cartridge, our 3M™ Auto Bedding and Glazing Compound is non hardening and stays permanently soft to make an ideal bedding for auto glass such as windshields. This material is formulated for a watertight seal between the rubber gaskets used in windshield installation and metal auto bodies, and it also makes an excellent supplemental sealer for auto glass installation all around the vehicle. Featuring a base of synthetic rubber, this medium bodied sealer is also non sagging for use in vertical and overhead auto seams with a minimum of dripping. It requires no mixing and cleans up quickly and easily with a dry rag. 3M™ Auto Bedding and Glazing Compound provides a working time of 40-50 minutes to help ensure accurate application of the sealer and auto components, and fully cures in as little as 24 hours. The sealer won't harden or crack even when fully cured. The Science of Better Collision Repair from 3M 3M has long been developing new ways to apply science to the lives of professionals in a range of industries including collision repair. Our 3M™ Auto Bedding and Glazing Compound is a great example — a product that delivers better results in time and quality for the most specific jobs. It's also something more: the right product at the right time for sealing windshields, auto glass and auto seams to help you get the most value and customer satisfaction from your entire operation.

Tinted window film. 3M Automotive Window Film present an innovative technology for tinted window films. It provides maximum protection from heat and UV rays. Unlike others, this window film series uses 3M’s nano-carbon polyester that guarantees outstanding color stability for long term use. This revolutionary process provides the films with outstanding color stability. This series does not contain metal film layer which can interfere with satellite signals. 3M CS5 Color Stable Black provides significant protection from heat and harmful UV rays. Remains the same from inside and outside and insures great visibility even at nighttime. Extremely sustainable and highly durable.

A ready-to-use silicone dressing for use on interior vinyls, plastic, and rubber surfaces. Produces a deep color, natural gloss appearance. New lemon fragrance. 3M™ Interior Dressing is a ready-to-use water-based silicone emulsion designed to restore a natural gloss appearance to all vinyl, leather, rubber and plastic interior vehicle surfaces.Directions for Use:1. Spray onto a clean, soft, cotton terry cloth towel and wipe onto the surface, or spray directly onto the surface and wipe. Use enough material to achieve a uniform appearance.2. Wipe off excess material using a clean, soft, dry terry cloth towel to achieve a natural look and feel.Tips:- For a lower gloss dilute 3M™ Interior Dressing 1:1 with water.- For a higher gloss use 3M™ Engine Dressing undiluted. For a lower gloss dilute 3M™ Interior Dressing 1:1 with water For a higher gloss use 3M™ Engine Dressing, undiluted Silicon dressing Water based Ready-to-use

Safely remove dirt and grime without removing the wax protection with 3M™ Car Wash Soap. Our car wash soap is a highly concentrated formula that’s phosphate and silicone free. It can also be used as a lubricant for 3M™ Perfect-It™ Cleaner Clay 38070 and wet sanding. Protect the paintwork and wax finish on vehicles, while removing the dirt and grime with 3M™ Car Wash Soap. Our highly formulated, phosphate and silicone free car wash soap creates long lasting suds which safely removes dirt and grime to leave the vehicle looking like new. Our Car Wash Soap can also be used as a lubricant for 3M™ Perfect-It™ Cleaner Clay 38070 and wet sanding. Dilution ratio: 1 part concentrate to 100 parts water. • Safely remove dirt and grime • Protect the paintwork and wax finish when cleaning vehicle • Concentrated formula Phosphate-free • Dilution ratio: 1 part concentrate to 100 parts water • May also be used as a lubricant for 3M™ Perfect-It™ Cleaner Clay 38070 • Formula dries quickly and leaves no residue

3M™ Super Duty Rubbing Compound is an Aggressive compound that removes 1000 and finer sand scratches on all types of paint surfaces and gel coats 3M™ Super Duty Rubbing Compound is an aggressive compound that removes 1000 and finer sand scratches on all types of paint surfaces and gel coatsRemains wet on the job with little or no mess. Maintains high rate of cut with constant pressure. Buffs to high gloss with minimum of swirl marks. Can be used by hand or machine. • Economical liquid compound • Removes 1000 and finer sand scratches • Remains wet for a long time and continues to cut with medium pressure • Can be used by hand or machine • High rate of cut • Specifications Brand 3M™ Consistency Liquid Consumer Label Yes Performance Level Good Product Form Rubbing Compound Type Rubbing Compound Volume (metric) 473 mL

Exceeds NHTSA requirements Highly reflective at wide angles to almost 90 degrees from perpendicular Aggressive, pressure-sensitive adhesive Easy-to-remove liner Highly reflective microprismatic lens sheeting with pressure sensitive adhesive for application to sides and rear of large trucks, trailers and other vehicles to increase their visibility, especially when the vehicle is turning or crossing roadways.

Medium Color Stable film is the standard in the automotive market. Becoming one of the most popular films in the line, CS 20 allows 19% of visible light through the glass. It rejects heat, reduces glare and retards interior fading. 3M has developed a revolutionary and unique process, which allows for maximum jheat rejection without a metal film layer, which can interfere with radio and/or satellite signals. It also gives our films a stylish look with outstanding color stability. In fact, it's so advanced that in time based tests, 3M Color-Stable Auto Film never turned purple while conventional dyed films rapidly changed to purple color Colour stable, non-metalised film that never turns purple Non-metallised — No Signal Interference Reduces glare and interior fading Reduces heat: upto 51% TSER Premium 3M Manufacturer's Warranty

Designed for use with 3M™ Cavity Wax Plus 08852 (sold separately) Makes it faster and easier for automotive technicians to apply cavity wax in hard-to-reach places Includes wands in three lengths for a range of jobs 24” and 34” wands feature small 360-degree spray nozzles at the ends, helping ensure total coverage Additional 8” wand is excellent for flooding seams and joints All OEMs recommend the application of internal anti-corrosion material during body repair, which includes cavity wax 3M™ Cavity Wax Plus Applicator Wand Kit 08851 allows body shop technicians to apply 3M™ Cavity Wax Plus in hard-to-reach places such as internal door skins and frame rails. The kit includes 24” and 34” wands with built-in 360-degree spray nozzles, and an 8” wand for flooding seams. Cavity wax is part of the internal corrosion protection recommended by all OEMs during automotive collision repair. 3M™ Cavity Wax Plus Applicator Wand Kit Kit includes 8", 24" and 34" wands for use with 3M™ Cavity Wax PlusKeeps Corrosion from Starting in Internal Automotive Panels To help protect the internal spaces and pockets of a vehicle, our 3M™ Cavity Wax Plus Applicator Wand Kit helps body shop technicians apply 3M™ Cavity Wax Plus 08852 to hard-to-reach locations such as frame rails, door cavities, lift gates and rocker panels. The wand kit consists of three small-diameter wands in 8", 24" and 34" lengths. The 8" wand delivers a powerful stream of cavity wax to flood and seal joints. The 24" and 34" wands feature integrated spray nozzles which deliver the cavity wax in a uniform 360° spray pattern to ensure consistent coverage on all sides of an enclosed space. The wand kit helps you apply Cavity Wax Plus to all sides of internal rocker panels, dog legs, frame rails and other concealed places, and provides the correct flow and wicking for consistent and uniform protection. Each wand has an actuator which fits directly onto the Cavity Wax Plus spray can. The 3M™ Cavity Wax Plus Applicator Wand Kit is very easy to use and to incorporate into your standard shop processes and procedures. The Importance of Protecting Inner Cavities No collision repair shop can replicate an OEM corrosion protection process (zinc phosphate baths, degreasers, DI water, heat-cured primers and sealers etc.). Also, the repair process itself — grinding, welding, heating or removal of protective coatings — can easily compromise OEM e-coats and create chances for corrosion.

3M™ Scratch Remover offers an ideal way to repair simple damage such as course-to-fine scratches, swirl marks, or paint imperfections with no hassle and no waiting. Our product uses fine minerals to remove the scratches from the paint and bring back a high polish finish. Using our paint scratch remover is an inexpensive option for repairing automotive surface blemishes. Scratches Disappear 3M™ Scratch Remover actually polishes out scratches from clear coats, not just fill them in with wax like many products do. What's left behind is a beautiful, high-polished finish that will impress you. Our product removes many types of automotive surface blemishes, including car wash scratches, scuffs, oxidation, light stains, tree and shrub branch streaks and surface contaminants. A Choice of Application Methods We formulated our scratch remover for cars for ease of use. It's a versatile product that may be applied by either and or machine. When applied by hand, it is easier to use than rubbing compound and doesn't require any tools. Directions for Use To Apply By Hand Apply to small areas, about one to two square feet. Dispense a quarter size drop of remover onto a clean, soft, microfiber cloth. Apply to the painted surface using a firm circular motion. Work the area using a firm, circular motion until the cleaner is dry. Remove remaining film using a 3M™ Microfiber Detailing Cloth (PN 39016) To Apply By Machine Dispense enough material on the surface to work a one-foot by one-foot area. Buff area using an air or electric buffer equipped with a 3M Polishing Pad using light to medium pressure. Reduce pressure when product begins to dry. Remove remaining film using a 3M™ Microfiber Detailing Cloth (PN 39016) Professional Results the Easy Way 3M™ Scratch Remover adapts the trusted technology and innovation found in the professional scratch repair products into a simple solution. It offers ease of application and is very economical to use. Our scratch removal product is an excellent choice for removing blemishes on cars, trucks, motorcycles and snowmobiles. • Scratch remover eliminates scratches, swirl marks and more • Formula contains no wax so scratches are polished out, not filled in • Compound combines medium-cutting with fine finishing • Versatile product may be applied by hand or machine • Product delivers professional results at an economy rate

.

The advance, dust free finishing solutions you expect from 3M have full circle Recommended for used with 3M air-powered central vacuum sanders and abrasives, this light weight portable dust extraction machine Excellent dust extraction during sanding operation. Recommended for used with 3M air-powered central vacuum sanders and abrasives, this light weight portable dust extraction machine Recommended for use with 3M™ Air-powered Central Vacuum Sanders and 3M™ Abrasives

General purpose aerosol degreaser. Removes grease, dirt, grime from engines. Safe for under-the-hood rubber and plastic parts. Usage Directions: 1) Remove the black safety cap and spray a wet heavy coat onto the surfaces to be cleaned. 2) Wait 1 to 2 minutes to allow the cleaner to dissolve and penetrate. 3) Rinse the surfaces with warm water to remove the residual cleaner and contaminates. 4) Repeat applications may be necessary to remove heavy deposits.5) Replace black safety cap and store or dispose of properly. Powerful cleaner removes grease, grime and dirt Safe for most under-the-hood rubber and plastic parts Fast acting Aerosol product offers spray-on convenience Cleaner works without any scrubbing - simply spray and rinse

Medium-bodied, water-based sealer works well for both interior and exterior applications Easy-application formula adheres well to primed and painted surfaces Sealant allows for easy featheredging Water may be used for cleanup before product dries Quick drying allows painting in 30 minutes 3M™ All-Around Autobody Sealant creates quick-drying seal on most interior and exterior automotive body joints and seams. Our medium-bodied, water-based seam sealer applies easily and adheres well to properly prepared primer and paint. It may also be smoothed to a featheredge with a wet finger to a smooth, clean appearance. When a firm, tough and water-resistant seal is needed, 3M™ All-Around Autobody Sealant is an ideal choice for its ease of application and excellent performance. Quick drying allows painting in 30 minutesSeal Joints and Seams with Confidence When a firm, tough and water-resistant seal is needed, 3M™ All-Around Autobody Sealant (PDF, 24 Kb) is an ideal choice for its ease of application and excellent performance. Our sealant can be painted in approximately 30 minutes, offers easy water cleanup and will not harm paint. When dry, it resists water, vibration, heat and cold. The sealant may be applied where it is desirable to eliminate solvents (other than water). Recommended for Tough Environments This sealer is especially good for customers in hot, dry environments, such as the southwestern United States, because it will not dry as quickly as a solvent based seam sealer.

Adhesion Promoter 05907 is compatible with all 3M Flexible, Semi-Rigid and TPO Repair products Provides enhanced adhesion of 3M Adhesives to TPO-type substrates Aerosol dispenser ensures easy application Provides stronger adhesion to deliver excellent featheredge results 3M™ Polyolefin Adhesion Promoter is a specially formulated adhesion promoter for use when repairing low surface energy plastics such as thermopolyolefin (TPO). Use our adhesion promoter with 3M brand adhesives. 3M™ Polyolefin Adhesion Promoter is designed specifically for polyolefin and ethylene propylene plastic identified by the marks PP, EP, TPO or EPDM on the back of the part. 3M™ Polyolefin Adhesion Promoter 05907 ensures strong adhesion when repairing PP, EP, TPO or EPDM substrates. Compatible with 3M Flexible, Semi-Rigid and TPO Repair productsCompatible with all 3M Flexible, Semi-Rigid and TPO Repair Products 3M™ Polyolefin Adhesion Promoter 05907 ensures strong adhesion when repairing PP, EP, TPO or EPDM substrates with a number of 3M products including 3M™ Flexible Parts Repair Kit 05895, 3M™ EZ Sand Multi-Purpose Repair Material 05887, 3M™ Semi-Rigid Plastic Repair 34240, 3M™ Semi-Rigid Plastic Repair 04240, 3M™ Super-Fast Repair Adhesive 04747 and 3M™ Super-Fast Plastic Repair 04247. Our product may be used for the repair of polypropylene and ethylene propylene interior and exterior parts. 3M Science in Action We used the dynamics of science to create a product that promotes better adhesion. Our goal is to employ science in a way that makes your work easier and more productive.

Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry. Ideal for dry or wet sanding of wood, paint, metal, plastic and drywall. When finished, simply rinse and reuse. Conformable, comfortable, flexible and convenient. The full thickness medium sponge is perfect for preparing old bottom paint for a new coat; used wet, it keeps the air clean of dust. Flexible abrasive coated foam sheets Aluminum oxide abrasive offers a long life and fast cut Help eliminate finger marks Can be used wet or dry

High-performance professional applicator gun for applying caulks, sealants and adhesives Cast steel barrel, rod, handle and trigger mechanism adds durability and long life Curved back of rod creates convenient hook for hanging on racks when gun is not in use Pressure release lever is thumb-operated for ease of use Sized for 1/10-gallon cartridges, compatible with many 3M products Our 3M™ Professional Caulking Gun is a high-performance rod-driven applicator gun for dispensing single-component 3M caulks, sealants and adhesives in collision repair. Its cast steel construction holds up under challenging conditions, and its friction feed operation helps ensure smooth beads and professional results. Added features include a hanging hook and thumb-activated pressure release. A Caulking Gun Designed for Professionals When you need a little extra in a rod-driven applicator, our 3M™ Professional Caulking Gun is designed specifically for professional application of 3M sealants, caulks and adhesives. The gun is designed for 1/10-gallon cartridges, ensuring a precise fit with a range of 3M products. This friction feed applicator gun makes it fast and easy to create smooth beads for a variety of collision repair applications. Trigger-pull operation makes extruding the material easy and intuitive. The gun features a compact design including a curved hook for hanging on racks or walls and a thumb-operated pressure release lever. Every major component of the 3M™ Professional Caulking Gun is built from durable cast steel, including the barrel, rod, thumb release, handle and trigger for long product life. Learn more about Standard Operating Procedures for Collision Repair (PDF, 3.5 Mb) Better Science in Collision Repair from 3M 3M delivers products with scientific development built in for an added professional edge. With its features for durability, convenience and smooth application, our 3M™ Professional Caulking Gun is another great example of how 3M applies science to the lives of auto repair technicians.

Backup pad supports single-sided compounding or polishing pads Provides a firm attachment, yet allow for easy removal of abrasive disc Centers compounding or polishing pads with great accuracy Part of the 3M™ Perfect-It™ System 3M™ Hookit™ attachment system allows for simple disc changes 3M™ Perfect-It™ Back-up Pad allows for easy attachment, quick removal and accurate centering of compounding or polishing pads. We used our 3M™ Hookit™ attachment system for these pads to enhance convenience and boost productivity with quick change of abrasive discs. 3M™ Perfect-It™ Back-up Pad 3M™ Perfect-It™ Back Up Pad, 05718Advantages ranging from greater convenience to better performance The need for auto body shops to achieve professional-level results while boosting overall shop productivity. Our back-up pad delivers on multiple counts including providing a quick-change advantage and producing exceptional finishes on today's automotive paints. Our pad provides a secure, no-slip attachment, yet allows for easy removal of abrasive discs when necessary. We recommend this pad for producing professional quality finishes on gelcoat and paints.

3M™ Leather and Vinyl Restorer deep cleans dirt and grime from all vinyl, leather, rubber and plastic surfaces. It wipes away residue and deposits that tarnish the appearance of car seats, arm rests, trim and other interior components. It deep cleans so that the interior of your vehicle looks, feels and smells like new. Clean and Condition Over time, dirt and grime builds up on seats, arm rests and other surfaces in a car. But now it's easy to clean away that film and residue with 3M™ Leather and Vinyl Restorer. It offers deep-cleaning action to rid leather, vinyl, rubber and plastic surfaces of dirt and grime. In addition to cleaning surfaces, our restoration product also conditions to bring luster back to leather and vinyl. Refresh the Interior or Your Car Our product softens and loosens stubborn deposits clinging on the surface, while conditioning oils help to keep the material, soft, supple and hydrated. Our leather and vinyl restorer is enriched to give vinyl and leather a lustrous appearance and feel. It will feel soft to the touch, and freshens the interior of your car by leaving an invigorating lemon scent. One Product, Two Jobs Best of all, you can clean and condition in one step with a single product! There is no need to buy two separate products for cleaning and conditioning. Just one product with one application does both, potentially saving you time and money. Directions for Use: Spray onto a 3M™ Microfiber Detail Cloth (PN 39016) or a clean, soft, cotton terry cloth towel. Wipe surface using enough product to achieve a uniform appearance after wiping. Renews the appearance and feel of leather and vinyl Dual-purpose product cleans and conditions Lemon scent freshens car interiors Easy-to-use formula Spray On, Wipe Off

• Adhesive cleaner removes sticky adhesive residue • Renews appearance of vehicles with a fresh, clean surface • Safe for use on painted surfaces, vinyl and fabric when properly used • Bulk can or spray-on aerosol affords convenience for quick applications • Turns stubborn adhesive grime into a no-problem cleanup 3M™ General Purpose Adhesive Cleaner removes adhesive residue with ease. Our special formula is tough on adhesive residue but gentle on paint, vinyl and fabric when used as directed. This adhesive cleaner is available as a spray-on aerosol or in a 1-quart can for convenience. Specially blended solvent for removal of specialty adhesives. Removes Stubborn Adhesive Residue 3M™ General Purpose Adhesive Cleaner makes the job of removing adhesive residue an easier task. More effective than plain water, our solvent works by softening sticky substances that are often stubborn to remove. It penetrates into sticky residue, allowing you to wipe it away with greater ease. What's left behind is a clean surface free of film or stickiness. A Must-Have Product for Auto Body Repair and Detailing Shops Our adhesive cleaner is great for auto body repair shops. Its easy-to-use spray-on aerosol or 1-quart can allows for quick cleaning of surfaces. Keep Vehicles Looking Clean Collision repair professionals should keep 3M™ General Purpose Adhesive Cleaner handy to keep small problems from growing more significant. In the shop, vehicles can easily become contaminated by adhesive residue during various stages of body repair. The ability to quickly remove these stubborn substances helps maintain a better appearance throughout the repair process, and better customer satisfaction once it's finished.

Formulated to clean intake valves, combustion chambers, and fuel injectors. Use with 3M™ Gauge/Regulator PN08828. Works on high pressure fuel systems. Professional Formula Universal Fuel System Cleaner is a concentrated cleaner formulated to clean intake valves, combustion chambers and fuel injectors. It is designed to be attached directly to the engine's fuel system. Easy to use Effective Oxygen sensor safe Clean burning 100% cleaning solution Restores power, performance, and fuel economy Protects against carbon build-up and engine knock Decreases exhaust emissions

3M™ Engine and Tire Dressing uniformly coats and shines engine hoses, tires, plastics and moldings to renew a fresh, clean and deep-colored appearance. Our water-based silicone emulsion concentrate will not harm rubber parts used in vehicles. 3M™ Engine and Tire Dressing restores that "like-new" look on rubber, plastic and vinyl components on cars, trucks and vans. Our dressing refreshes the original deep black appearance on tires, hoses and rubber moldings. It removes film and grime to deepen the color of vinyl and plastic. This water-based silicone emulsion formula produces a clean, uniform appearance with a medium gloss shine. Auto detailing professionals rely on our engine and tire dressing for updating the visual appearance of vehicles. It is highly recommended for anyone who takes pride in the appearance of their automobile. Renewing the aesthetic appearance of vehicles can often boost the resale value of used cars. Directions for use - Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information: Engines - Add one part concentrate to one part water. Apply a uniform coating directly onto the engine and engine compartment and allow to dry. Tires - Spray a thin, uniform coating of dressing concentrate directly onto the tires and allow to dry. Remove overspray from the wheel, hubcaps or painted surfaces using a clean, soft and dry terry cloth towel. Note: Do not use on motorcycle, bicycle or other two-wheeled vehicles' wheels or seats. Why? Avoid spraying onto brake rotors, brake drums or brake pedals. Why? We should add what the hazard is – in both instances. Ask Regulatory to provide. Refreshes the appearance of rubber, plastic and vinyl Deepens the black color of tires, hoses and moldings Renews the color of plastic and vinyl Easy-to-apply formula Water-based silicone emulsion is gentle on rubber

Excellent for cleanup just before painting. Use to remove dirt, lint, dust and sanding particles from metal, plastic, fiberglass and wood. Use again and again. Stays soft. Non-toxic. 3M™ All Purpose Tack Cloth is excellent for cleanup just before painting. Use to remove dirt, lint, dust and sanding particles from metal, plastic, fiberglass and wood. Use again and again. Stays soft. Non-toxic. Reduces adhesive transfer to the hands No drag marks left behind Good dust collection - dust is drawn into the tack cloth Will not dry out even in an oven Insures blemish-free refinishing for all paintable surfaces

Streak-free formula puts the sparkle and shine back into automotive glass Cuts through stubborn grit and grime on windshields and windows No-drip foaming action clings to vertical surfaces Use on all glass surfaces, including windshields, windows and mirrors Also safe for use on plastic, vinyl, chrome and metal 3Mâ„¢ Glass Cleaner restores clarity and puts the sparkle back into automotive glass. Our special formula resists streaking on all glass surfaces, including windows, windshields, mirrors and side glass. It is also gentle and safe to use on plastic, chrome and metal. Aerosol can makes glass cleaner convenient to apply.

• Cleaner removes varnish resins and gums from carburetors • Product restores optimal carburetor performance • High delivery rate flushes away loosened deposits • Formula is oxygen sensor safe • Aerosol can offers spray on convenience 3M™ Carburetor Cleaner effectively and quickly removes varnish, resins and gums from carburetors and chokes. Our cleaner has a high delivery rate that flushes away loosened deposits. It is oxygen sensor safe and contains less than 75 percent VOC. Powerful penetrating ingredients remove varnish, resins and gums from carburetors and chokes. High delivery rate flushes away loosened deposits. Excellent general purpose cleaner. Oxygen Sensor safe. Contains less than 75 percent VOC.

A-weight paper backing is ideal for fine power sanding and finishing Aluminum oxide abrasive combines fast cut with long disc life Hookit™ disc is easy to change and reuse, maximizing utility for the life of the disc Open coat construction provides a more aggressive cut and minimizes dust Load-resistant coating prevents dust and debris from clogging the disc The family of 3M™ Hookit™ Gold Discs delivers smooth and consistent finishes on jobs from to primer sanding to paint scuffing Our 3M™ Hookit™ Gold Disc 216U is precision-coated for long life and exceptionally smooth finishing to auto body sanding projects. It features light A-weight paper backing with sharp, durable aluminum oxide abrasive – a fast, aggressive cut, yet a uniform finish for feather-edging and primer sanding. Our load-resistant coating and available 5- or 6-hole pattern provide superior dust resistance.

A clear breakthrough in automotive window films. The Crystalline Series rejects more heat than many dark films without changing the appearance of your vehicle, making it the superior choice for comfort. Light tint rejects up to 60% of solar energy and up to 97% of heat-producing infrared rays for the ultimate in comfort. Designed to enhance your view by allowing visible light into your vehicle while keeping heat out, so you can see clearly and safely. Non-metallized window film lets you stay connected with mobile devices, GPS or satellite radio reception without interference. Blocks up to 99% of ultraviolet (UV) light to provide a total Sun Protection Factor (SPF) of 1000 for you and your passengers. Sold and installed by 3M Authorized Dealer Installers, our films are durable, virtually maintenance-free and backed by a limited lifetime warranty. The Crystalline Series features a proprietary, multilayer optical film nano technology that combines over 200 layers in a film that is thinner than a Post it® Note. Improving comfort, protecting vehicle interiors and blocking UV rays are hallmarks of 3M™ Automotive Window Films. 3M was issued the first sun control window film patent in 1966, and our innovative window film products have helped provide protection from the sun’s harmful rays for 50 years. NOTE: Auto tint laws vary by state or province. Please check your local laws or ask your dealer installer for films that meet your local tint laws.

Excellent for hand compounding applications. It safely and effectively removes grade 1500 or finer sand scratches, other fine scratches, medium oxidation, coarse swirl marks or water spots, and leaves a fine finish. Excellent for hand compounding applications. It safely and effectively removes grade 1200 or finer sand scratches, other fine scratches, medium oxidation, coarse swirl marks or water spots, and leaves a fine finish. Usage directions HAND 1. Apply to small areas, about one to two square feet. 2. Dispense a quarter-size drop of material onto a clean, soft, cotton terry cloth towel and apply to the paint surface. 3. Work the area using a firm, circular motion until the rubbing compound is dry. 4. Remove remaining film using a 3M™ Microfiber Detail Cloth (PN 39016) or a clean, soft, cotton terry cloth towel MACHINE 1. Dispense enough compound on the paint surface to work a two-foot by two-foot area. 2. Buff area using an air or electric buffer equipped with a 3M™ Compounding Pad using light to medium pressure. 3. Reduce pressure when compound begins to dry. 4. Remove remaining film using a 3M™ Microfiber Detail Cloth (PN 39016) or a clean, soft, cotton terry cloth towel. 5. To enhance the finish, remove compounding swirl marks using 3M™ One Step Cleaner Wax (PN 39006). • Do not apply in direct sunlight or onto a hot surface • Wash and dry vehicle using 3M™ Car Wash Soap (PN39000) • Liquid compound for ease of use • Fine mineral content leaves minimal swirl marks • Extremely versatile product that is safe for clear coat, lacquer and enamel paint finishes

Removes foreign particles embedded in automotive paint and clear coat that dulls its sparkle and compromises its protective barrier Use with 3M™ Perfect-It™ Clean and Shine water-based detailer Frequent use helps keep paint and clear coat free of contaminants Restores smooth as glass feel Effective on paint, glass and chrome 3M™ Perfect-It™ Cleaner Clay removes contaminants on the surface of automotive finishes that dull its gloss. Our clay will efficiently remove overspray and paint contaminants. This product can be used effectively on paint, glass and chrome when used with a water-based lubricant. 3M™ Perfect-It™ Cleaner Clay 3M™ Perfect-It™ Cleaner Clay is effective on paint, glass and chromeMicroscopic Matter Dulls Paint Not easily washed off and invisible to the naked eye, particulate debris like rail dust, brake dust and industrial fallout will bond to automotive paint, and distort the reflective quality of the surface, dull its gloss and may eventually cause oxidation. 3M™ Perfect-It™ Cleaner Clay removes these difficult contaminants better than washing alone. Microscopic debris penetrates a vehicle's clear coat every day, especially in areas especially prone to pollution. This debris can build up over time, and easily remain even after the vehicle has been washed. 3M™ Perfect-It™ Cleaner Clay easily removes road dirt, tree sap, pollution, paint overspray or road paint spatter — difficult to get off the surface by other means — to restore a "like new" surface. 3M Science. Applied to the Surface Details. Automotive paint does more than look good. It provides a barrier and protects the metal from the damage caused by weather, like corrosion and loss of gloss, environmental debris. Our 3M™ Perfect-It™ Cleaner Clay is preferred by collision repair technicians around the world. Engineers and technicians choose 3M products as the best solutions for their manufacturing and repair needs every day. At 3M, we apply the "science of smooth" to help you build and maintain more perfect surfaces. Because details matter.

This liquid shiner is easy to use on the vehicle surfaces.

3M PREMIUM LIQUID WAX 100ml

PN08880 removes oil up to 2X faster – use up to 50% less brake cleaner High-pressure flushing action cleans braking systems with ease Multi-purpose formula removes dust, oil, tar and grease Versatile cleaning properties allow use on most braking components Thorough cleaning action helps eliminate squeal and chatter 3M™ High Power Brake Cleaner now removes oil up to 2x faster, meaning technicians can use up to 50% less brake cleaner. It cleans brake parts and assemblies without leaving residue. Large, ergonomic actuator delivers a high-powered stream to remove tough deposits. the cleaner removes brake dust, solvents, greases and oils. 3M™ High Power Brake Cleaner blasts away loose friction material, dirt, dust, brake fluid, and other contaminants from all types of brake assemblies. High-pressure, flushing action cleans braking systems with ease 3M™ High Power Brake Cleaner's fast cleaning action quickly softens and dissolves grease and oil. Its unique chemistry has a low odor, it dries quickly, leaves no residue, and helps eliminate brake noises due to surface contamination. It contains no Chlorinated Solvents. Easy to target precise locations Get Rid of Brake Gunk Fast 3M™ High Power Brake Cleaner blasts away loose friction material, dirt, dust, brake fluid, and other contaminants from all types of brake assemblies. Its fast-cleaning action quickly softens and dissolves grease and oil. Its unique low-odor chemistry dries quickly, leaves no residue, and helps eliminate brake noises caused by surface contamination. It contains no chlorinated solvents. 3M offers this brake cleaner in three versions: PN08880 contains 96% VOC. PN08180 contains less than 45% VOC. PN08179 contains less than 10% VOC. Aim, Spray, Clean — It's That Easy A high-pressure delivery system flushes contaminants off the brake assembly with ease. The delivery system has been designed to hit the targeted oil, grease and dirt with exceptional accuracy. A small extension straw is included making targeting precise locations even easier. The cleaner penetrates deeply to rid the brakes of gunk hidden in hard-to-reach spots. The cleaner is recommended for brake linings, shoes, drums, cylinders, caliper units, disc brake pads, and all other related parts. Because this one product cleans away so many types of contaminants, it reduces the need to stock multiple cleaners. Makes Brake Cleaning an Easy Task We made this brake cleaner easy to use (PDF, 2.4 Mb). Simply hold the can 12 to 24 inches from the surface and, starting at the top, wash the contamination down and off the area being cleaned. If parts are extremely contaminated, repeat the application. Then remove excess with a paper towel and dispose of properly. The cleaner dries quickly and leaves no residue. Importance of Clean Brakes Under normal road conditions, residue builds up on vehicle braking systems. That's why keeping your brake components in top-working condition should be an important part of your ongoing vehicle maintenance. Using this brake cleaner is a simple step that can be taken to restore the cleanliness of brakes. You'll notice the difference because newly cleaned brakes are less likely to squeal and chatter, making the car ride more enjoyable.

Shines and protects new and like-new paint finishes, producing a deep, high gloss, lustrous, durable wet look finish. Shines and protects new and like-new paint finishes, producing a deep, high gloss, lustrous, durable wet look finish. • Creates a slick, shiny finish • Protects the paint against UV radiation, moisture, and dirt • The polymer finish deters the adhesion of dirt and grime, so the vehicle stays cleaner longer • May be used by hand or with a machine • Special formulation is capable of removing road film or light oxidation from car finishes

Safely removes dirt and grime without removing your wax protection. This product is clear coat safe and is phosphate free. Concentrated car wash soap that safely removes dirt and grime without removing wax protection. Phosphate free and body shop safe, contains no silicones. Dilution ratio: 1 part concentrate to 100 parts water. May also be used as a lubricant for 3M™ Perfect-It™ Cleaner Clay 38070. Excellent for wet sanding lubricant. Concentrated formula for long lasting suds Phosphate free Safely removes dirt and grime Dilution ratio: 1 part concentrate to 100 parts water May also be used as a lubricant for 3M™ Perfect-It™ Cleaner Clay 38070

32 fluid ounce size for efficient storage of frequently-used cleaning products Fluorinated to resist permeation, discoloration and paneling Lighter replacement for glass or metal storage containers and dispensers Neck fits 3M™ Spray Trigger Nozzle Head 37717 ensuring flawless fit Long-lasting and cost-effective spray bottle for auto shop cleaning fluids Our durable 32-once Detailing Spray Bottle lets body shop technicians dispense 3M™ Body Shop Clean-Up™ products easily and efficiently. It is fluorinated to resist paneling, discoloration and odor permeation, making it suitable for storage of water-based glass cleaners, wheel cleaners, degreasers and detergents. Its tapered neck fits 3M™ Spray Trigger Nozzle Head 37718.

Remove finishing abrasive sand scratches and other paint surface defects Fast Cutting Compound Pad Untwisted wool yarn construction improves handling across large surface areas Designed for use with the 3M™ Hookit™ Attachment System Works with 3M compounds and adapters for fast, consistent results Use 3M™ Wool Compounding Pad with 3M compounds and attachment systems, for compounding on paints, clear and composite surfaces. Choose from 100% wool or finer 60/40 wool blend, for a variety of jobs. Use with our Hookit™ attachment system, for fast change-outs. Get a flawless finish. Get a flawless finish and efficient compounding on paints, clear and composite surfaces, with the 3M™ Wool Compounding Pad. Our compounding pad is designed for easy use with 3M compounds and attachment systems, for efficiency and great results. Choose from 100% wool or finer 60/40 wool blend, to suit your job. Our double-sided untwisted wool yarn pads have a stiff, durable centre hub that supports the wool abrasives during flat or aggressive compounding processes. The fuller pad offers good handling across larger surface areas. You can easily attach this screw on pad to orbital sanders and other power tools, with the 3M™ Adapter, 05710. Use our single-sided wool blend pad for refining paint surface defects during the auto body compounding process. Designed for use with our Hookit™ attachment system, a hook and loop system that works with back-up pads and attachment plates and saves you time thanks to fast change-outs. All our wool compounding pads are designed to work well with our Perfect-it™ paint finishing system, for high performance throughout the paint finishing process. This system includes scratch refinement discs and pads, compounds, polishes, and cleaners.

• Compound removes scratches caused by sanding • Formula effectively removes oxidation, stains and surface blemishes • Application creates a lustrous shine with minimal swirl marks or holograms • Fast-cut formulation reduces compounding time 3M™ Rubbing Compound quickly removes sand scratches, oxidation, coarse swirl marks and water spots. Our liquid compound leaves minimal swirl marks and is safe for clear coats, lacquer and enamel paint finishes. This car rubbing compound makes dull and tired looking auto body finishes look new and glossy once again. Removes scratches, oxidation, water spots and contaminants from automotive finishes Refresh the Look of Your Car, Truck or Van 3M™ Rubbing Compound revives the luster and shine that makes a car glisten out on a sunny day. Our automotive rubbing compound removes sand scratches and smooths surfaces, making your car look amazing. Compounding removes the scratch pattern left by abrasives in previous sanding applications. While smoothing the surface, this product also removes oxidation, water spots and other stains and blemishes. A High Quality Finish with Minimal Swirl Marks Our rubbing compound for cars produces a high quality professional finish that helps reduce the appearance of coarse swirl marks. Its fast-cut formulation reduces compounding time, making car restoration a quicker and easier task.